tein s-techs...final thought
04-15-2007, 01:06 PM
#1
Registered User
Thread Starter
iTrader: (15)
Join Date: Apr 2006
Location: Baltimore
Posts: 2,918
Likes: 0
Received 0 Likes
on
0 Posts
tein s-techs...final thought
well, it's been a couple of weeks now and the passenger side is still lower than the drivers side. I don't know what is up, I thought they would settle good by now, guess not.
On the drivers side, I get 2 finger gap front and rear and on the passenger side, I can't fit both fingers, so it's like 1.5-1.75 finger gap.
Springs were installed right and last week, I put it on the lift and re-checked everything to see if anything was wrong, everything checked good.
What do I do now?
On the drivers side, I get 2 finger gap front and rear and on the passenger side, I can't fit both fingers, so it's like 1.5-1.75 finger gap.
Springs were installed right and last week, I put it on the lift and re-checked everything to see if anything was wrong, everything checked good.
What do I do now?
04-21-2007, 07:44 AM
#6
Registered User
iTrader: (8)
Join Date: Aug 2005
Location: NY
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Did you buy your springs from a reputable vendor? There are coutnerfeits going around?
http://www.tein.com/counterfeit/warning.html
http://www.tein.com/counterfeit/warning.html
04-21-2007, 07:45 AM
#7
Registered User
iTrader: (12)
Join Date: May 2006
Location: Ft. Lauderdale, FL
Posts: 4,216
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SS728
well, it's been a couple of weeks now and the passenger side is still lower than the drivers side. I don't know what is up, I thought they would settle good by now, guess not.
On the drivers side, I get 2 finger gap front and rear and on the passenger side, I can't fit both fingers, so it's like 1.5-1.75 finger gap.
Springs were installed right and last week, I put it on the lift and re-checked everything to see if anything was wrong, everything checked good.
What do I do now?
On the drivers side, I get 2 finger gap front and rear and on the passenger side, I can't fit both fingers, so it's like 1.5-1.75 finger gap.
Springs were installed right and last week, I put it on the lift and re-checked everything to see if anything was wrong, everything checked good.
What do I do now?
same with my eibach pro's
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM