Confused!
So, i just changed my front brake pads, and when i turned the car on to take it around the black, the "VDC off", SLIP, and parking brake light are on. Even when the parkling brake is off the light is still on. I dont know why that would happen...
brake fluid is right below the max line, i bled them properly and everything. its not the first time ive changed brake pads, but it is the first on the Z, but everything is put back how its supposed to be. so i dont know whatsup with it
for ur parking break, this is not a joke, but tring driving in a wide street, for ur saftey make sure theres no cars, and go about 15 miles and jus pull the e brake, and take it off, the light would go off... im guessing it will work, cuz my frend had a problem with the his rpm, it was stuck on 2000 and he downshifted not too hard but it moved again..
Wait - did you only change the front pads or did you do that plus bleed the brakes?
Changing pads shouldn't cause the lights to come on unless you let the fluid get low. Since you claim that didn't happen, then it's not low fluid. Chances are that you damaged or disconnected one of the wheel speeds sensors or cables while changing the pads.
Changing pads shouldn't cause the lights to come on unless you let the fluid get low. Since you claim that didn't happen, then it's not low fluid. Chances are that you damaged or disconnected one of the wheel speeds sensors or cables while changing the pads.
Trending Topics
Wait - did you only change the front pads or did you do that plus bleed the brakes?
Changing pads shouldn't cause the lights to come on unless you let the fluid get low. Since you claim that didn't happen, then it's not low fluid. Chances are that you damaged or disconnected one of the wheel speeds sensors or cables while changing the pads.
Changing pads shouldn't cause the lights to come on unless you let the fluid get low. Since you claim that didn't happen, then it's not low fluid. Chances are that you damaged or disconnected one of the wheel speeds sensors or cables while changing the pads.
It shouldn't. It'll reset your stereo to default settings, but I don't really think it'll cause "problems". You have to do this when you're doing anything electrical anyway. i.e. installing a new stereo, etc.
^^i enjoy sliding the car but thanks for all the feedback but while i was on my way to work this morning they all went off at different times, so no more lights on... its weird but o well
In most cars, if a code is thrown, the light comes on. If the condition doesn't repeat, then the lights go out after a certain number of startups. Glad to hear the lights went out.
Thread
Thread Starter
Forum
Replies
Last Post
lolwatbro
Maintenance & Repair
9
Oct 9, 2021 04:58 AM
GettinOnIt
2003-2009 Nissan 350Z
1
Aug 18, 2002 07:35 PM





