StopTech <-> Fitting issue help!
Thread Starter
Registered User
iTrader: (2)
Joined: Mar 2005
Posts: 1,536
Likes: 0
From: Chatsworth,CA//Augsburg,GER
StopTech <-> Fitting issue help!
looking into getting some nice stoptech bbk but need some info about the fitment
Wheels:
SF-Challenge Diamond Black
FRONT: 19x9,5 offset +28
REAR: 19x10,5 +23 ET
will there be enough clearance for the brakes with this setup?
FRONT: 355 x 32 mm Rotor/ 6 Piston Caliper
REAR: 355 x 32 mm Rotor/ 4 Piston Caliper
thanks
Wheels:
SF-Challenge Diamond Black
FRONT: 19x9,5 offset +28
REAR: 19x10,5 +23 ET
will there be enough clearance for the brakes with this setup?
FRONT: 355 x 32 mm Rotor/ 6 Piston Caliper
REAR: 355 x 32 mm Rotor/ 4 Piston Caliper
thanks
Vendor - Former Vendor
Joined: Jan 2008
Posts: 138
Likes: 0
From: Redondo Beach, CA
Check the wheel fitment templates on our website here:
http://www.stoptech.com/tech_info/wheel_fitment.shtml
http://www.stoptech.com/tech_info/wheel_fitment.shtml
Thread
Thread Starter
Forum
Replies
Last Post
