Z1 selling BBK saying it had Brembo rotors and they were Autozones!
#1
Sleeps in 350Z
Thread Starter
Join Date: Feb 2004
Location: Mid-West
Posts: 3,513
Likes: 0
Received 0 Likes
on
0 Posts
Z1 selling BBK saying it had Brembo rotors and they were Autozones!
http://twinturbo.net/nissan/300zx/fo...bo-rotors.html
Z1 Motorsports not Z1 Auto folks.
With Bryan and Russell.
https://my350z.com/forum/members/101214-bryan-z1.html
https://my350z.com/forum/members/44902-russell-z1.html
Z1 Motorsports not Z1 Auto folks.
With Bryan and Russell.
https://my350z.com/forum/members/101214-bryan-z1.html
https://my350z.com/forum/members/44902-russell-z1.html
Last edited by Carbon-Z; 05-12-2009 at 09:37 AM.
#2
Sleeps in 350Z
Thread Starter
Join Date: Feb 2004
Location: Mid-West
Posts: 3,513
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
ATTN: MY350z forum members..
please do not confuse this "z1" with Z-1 Performance Inc. aka Z1auto.com from NYC aka Adam/Kwame ..they are NOT the same company..
Adam/Kwame are NOT associated with the Z1 that is listed in the thread. that place that sold the questionable rotors are out of GEORGIA...
thank you.
please do not confuse this "z1" with Z-1 Performance Inc. aka Z1auto.com from NYC aka Adam/Kwame ..they are NOT the same company..
Adam/Kwame are NOT associated with the Z1 that is listed in the thread. that place that sold the questionable rotors are out of GEORGIA...
Z1 Motorsports
www.300zx.com
1990+ Nissan Z specialists
Used Parts, New parts, Service/Repair and Performance
Z1 Motorsports Exclusive Parts Line
2877 Carrollton Villa Rica Hwy
Carrollton, Ga 30116
www.300zx.com
1990+ Nissan Z specialists
Used Parts, New parts, Service/Repair and Performance
Z1 Motorsports Exclusive Parts Line
2877 Carrollton Villa Rica Hwy
Carrollton, Ga 30116
Last edited by Chebosto; 05-12-2009 at 09:37 AM.
#11
We've been purchasing the 13" rotors from our supplier as Brembo rotors. Our purchase orders state Brembo rotors. Our supplier buys blank rotors and then does the cross dilling and slotting before shipping them to Z1. After asking our supplier today (after it was brought to our attention) we were informed that when he runs out of Brembo blanks from time to time he sends replacements of equal or higher quality. We were assured we were not being sent "autozone" rotors. He informed us that all the part numbers from the major manufacturers of blanks cross reference and that most of the quality replacements are made in the same factory anyway, just sold under different brand names. Needless to say, if there are any problems we will take care of them. If anyone has problems or concerns please let us know. We feel confident there won't be any issues and that the blanks are all of consistent quality.
Russell Floyd
Found this over there, I used to buy a lot of stuff off these guys, hope it's not something shady and Russell is telling the truth.
Russell Floyd
Found this over there, I used to buy a lot of stuff off these guys, hope it's not something shady and Russell is telling the truth.
#13
Registered User
iTrader: (5)
Join Date: Nov 2006
Location: Seattle (area), WA
Posts: 2,921
Likes: 0
Received 0 Likes
on
0 Posts
We've been purchasing the 13" rotors from our supplier as Brembo rotors. Our purchase orders state Brembo rotors. Our supplier buys blank rotors and then does the cross dilling and slotting before shipping them to Z1. After asking our supplier today (after it was brought to our attention) we were informed that when he runs out of Brembo blanks from time to time he sends replacements of equal or higher quality. We were assured we were not being sent "autozone" rotors. He informed us that all the part numbers from the major manufacturers of blanks cross reference and that most of the quality replacements are made in the same factory anyway, just sold under different brand names. Needless to say, if there are any problems we will take care of them. If anyone has problems or concerns please let us know. We feel confident there won't be any issues and that the blanks are all of consistent quality.
Russell Floyd
Found this over there, I used to buy a lot of stuff off these guys, hope it's not something shady and Russell is telling the truth.
Russell Floyd
Found this over there, I used to buy a lot of stuff off these guys, hope it's not something shady and Russell is telling the truth.
#14
Registered User
iTrader: (5)
Join Date: Oct 2008
Location: The Derby State.
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Really odd to hear if it is really true. That site that is linked is hard to read.
Z1 Motorsports is top notch and they do great work. All I have ever heard from/about them is great stuff. I would wait for one of the empleyee's to chime in this thread.
Z1 Motorsports is top notch and they do great work. All I have ever heard from/about them is great stuff. I would wait for one of the empleyee's to chime in this thread.
#18
Registered User
iTrader: (15)
Join Date: Nov 2003
Location: Clarksville, Tennessee
Posts: 6,612
Likes: 0
Received 1 Like
on
1 Post
so what? stillen buys DBA rotors, labels them as stillen, and charges close to twice what they cost from DBA. stoptech uses centric blanks (from what i read). it happens all the time. a lot more than you know or that vendors will ever admit to.
and yes, there are two sides to every story. really hate when someone makes a thread with the intention of busting out a vendor. just for the sake of "thinking they are doing everyone a favor" when the part in question has nothing to do with the 350Z or the G35 at all
and yes, there are two sides to every story. really hate when someone makes a thread with the intention of busting out a vendor. just for the sake of "thinking they are doing everyone a favor" when the part in question has nothing to do with the 350Z or the G35 at all
Last edited by Z04; 05-14-2009 at 04:56 AM.
#19
New Member
iTrader: (2)
Join Date: May 2005
Location: Tennessee
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
But think about what you just said. So you are saying, because this specific incident isn't directly related to the 350Z or G35, you don't want to hear about it? If this actually does turn out to be true, what would make you think that this isn't going on with G35 or 350Z parts also? I would think people would want to hear things like this so they are aware of vendors who would so such a thing!!!!
#20
Registered User
iTrader: (15)
Join Date: Nov 2003
Location: Clarksville, Tennessee
Posts: 6,612
Likes: 0
Received 1 Like
on
1 Post
But think about what you just said. So you are saying, because this specific incident isn't directly related to the 350Z or G35, you don't want to hear about it? If this actually does turn out to be true, what would make you think that this isn't going on with G35 or 350Z parts also? I would think people would want to hear things like this so they are aware of vendors who would so such a thing!!!!
considering the kit in question is for the 300zx, and as far as the use of the word brembo when it comes to the G35/350z on their site that is used to determine the brake set up is either for a brembo equipped car or a non-brembo car. it does not specifically say "brembo rotors" are being used.