siliconesteve

I have a line on a set of used Brembo Calipers off a 2008 350Z with a VQ35HR engine. Does any one know if the Calipers will fit a 2004 350Z Roadster (non Brembo).

Z1 Performance

iTrader: (564)

you need everything - calipers, brackets, pads, hardware, rotors, lines

siliconesteve

The brackets Can I get them off a 2008 350Z? Or will I need to buy them off a fabricator?? If yes do you know of one??? The hardware, lines and rotors I’m assuming I can get them from Nissan????

Z1 Performance

iTrader: (564)

you need the complete setup as listed from the brembo equipped car

fabricating your own brackets will be cost prohibitive

Chris_B

If you are referring to the OE Brembo's (Track Model or Nismo), then they will bolt right on to an '04 as long as you use the correct rotors (your current ones won't work). The calipers are lug mount, so they don't use brackets. Just be sure you do front and rear so the bias is as intended.

Chris