SPL Rear Mid link V2 owners (spring bucket), need a dimension
03-24-2012, 09:42 AM
#1
hatersgonnahate
Thread Starter
iTrader: (162)
SPL Rear Mid link V2 owners (spring bucket), need a dimension
http://cdn.splparts.com/tech/SPLRMLZ33.pdf
I need to know the dimension of the lower spring holding cup. It is the silver piece with the threaded body. I need to know the OD of the cylinder.
I have a very cool project that I am working on that will benefit several 350z/g35 members if it works out. I don't want to buy the spring buckets if they will not work but these look like a viable solution.
I need to know the dimension of the lower spring holding cup. It is the silver piece with the threaded body. I need to know the OD of the cylinder.
I have a very cool project that I am working on that will benefit several 350z/g35 members if it works out. I don't want to buy the spring buckets if they will not work but these look like a viable solution.
03-24-2012, 04:54 PM
#3
The mid link I just sold is still in transit to the buyer, once it arrives Ill have him post up to get you that info.
In the meantime, best I could do is measure the OD of the spring I had it in and tell you theres about 2mm of play, plus 1-2mm thickness of that collar. I know, probably not accurate enough.
In the meantime, best I could do is measure the OD of the spring I had it in and tell you theres about 2mm of play, plus 1-2mm thickness of that collar. I know, probably not accurate enough.
03-25-2012, 05:29 AM
#7
hatersgonnahate
Thread Starter
iTrader: (162)
^thanks.
Working on a way to make it possible to install an air cup suspension kit in the rear. Dont know how people have been doing it and have not seen it done/pictures of the install.
There was a 4 wheel set sold the other week.........wondering how the buyer is installing.
Working on a way to make it possible to install an air cup suspension kit in the rear. Dont know how people have been doing it and have not seen it done/pictures of the install.
There was a 4 wheel set sold the other week.........wondering how the buyer is installing.
Trending Topics
04-20-2012, 05:15 AM
#11
^thanks.
Working on a way to make it possible to install an air cup suspension kit in the rear. Dont know how people have been doing it and have not seen it done/pictures of the install.
There was a 4 wheel set sold the other week.........wondering how the buyer is installing.
Working on a way to make it possible to install an air cup suspension kit in the rear. Dont know how people have been doing it and have not seen it done/pictures of the install.
There was a 4 wheel set sold the other week.........wondering how the buyer is installing.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM
