My track model brembo kit is on its way, and Jtree007 is gonna help me install, he told me to buy 4 sets of "speed bleeders" to make the install go quicker for bleeding the brakes. ANyone got links to which we need, he said he didnt know if it was 10mm with 1.0 threads or 1.25 threads?

 

anyone know?!!?

 

All I can say is the stock bleeder has a 1mm nut. So, I would assume the thread post is 10mm. Buy both the 1.0 threads and the 1.25 threads and see which fits. Return the ones that don't. Or, you could call Brembo. Sorry, wish I could help more.

 

You don't need speed bleeders, use your freind to pump the brakes and you work the wrench. so it takes you 5 minutes more. You will know for sure that its done right if you are up close and personal with your caliper....

 

Try calling speed bleeders, they are very helpful.

And you don't NEED them, but they are nice.

 

BREMBO:
p/n SB1010S
# 10mm x 1.0
# 31.35mm length

350Z Non-Brembo:
(requires (1) Pair of SB1010 & (1) Pair of SB7100)
The Non-brembo calipers are Nissan front and Mitsubishi rear calipers and have different size bleeders front to rear..

See here:
https://my350z.com/forum/brakes/4792...-bleeders.html

-J