SinCity350Z

iTrader: (19)

I would check into that more if I were you. If you are launching hard on slicks or DRs, it could help a lot with chassis twist. Since the Z was designed with that bar from the factory, I wouldn't feel comfortable assuming that the frame would hold up to that without it. For the weight of a bar that connects the two, I would say it is worth it. Even if its just one that bolts to the top of the rear perches and not integrated into the cage.

Audible Mayhem

iTrader: (48)

i am taking all the sub frame braces out and putting them back in with solid mounts, then i am putting in all solid diff mounts, i dont think there will be too much flexing, the bars going back welded to the main hoop are going to keep it in there pretty nice. i will see as soon as i drive it and launch a little hard to see how it feels. it would be easy to add for sure...

SinCity350Z

iTrader: (19)

Ok, that sounds alot better. With all of that, chances are you wil be fine without the brace. Good luck!

maximumsportZ

iTrader: (25)

Jermey, your a crazy ****.

sfarrah

iTrader: (4)

Are you getting your solid diff bushing from SPL? I know they plan to make the solid subframe bushings, but not sure when they'll be ready. I've been running the solid diff bushings for months now with no issues other than some added diff whine.

That cage looks amazing-mind if I ask you what it set you back?

Audible Mayhem

iTrader: (48)

actually, i am taking out all the bushings and having a guy around here make them all, then i will just sell them for cheap or what they are really worth without trying to rip everyone off cause they have a Z. i will be doing the subframe bushings as well.


cage cost me about 1800 total. if anyone wants the bars for the exact cage, they have all the bends on computer and they can bend one up ready to go, then just have your welder take care of the welds, OR you can drive down to orlando and let your car sit for a few weeks...

Ep3

iTrader: (10)

siiiicccckkk!! hope you never use it!

sfarrah

iTrader: (4)

Any idea on the price of the bars alone? Driving to Orlando is out of the question for me.

Audible Mayhem

iTrader: (48)

yeah, i will have the price on the bars really soon, he was going to figure them out for me so i can tell everyone not in this area what they could get them for and have them welded in.


i will let ya know as soon as i know..

Zexy

iTrader: (55)

Jeremy, cage is sick.

Get of pics of the final product all painted and ready

Audible Mayhem

iTrader: (48)

thanks guys, i wish i knew someone here in orlando that could come to my house and professionally paint the cage, i really dont want to tow it anywhere else


i am going to primer it tomorrow just so it doesnt rust, i just want it to look good...

sa@lol

Great Job. it looks so cool

Vinny@VTR

iTrader: (2)

awesome man.....

wilric44

If opinions are welcomed here I would have to say that it look like a lot of work. Which is probably true. My next question is do you have a 9 second car or are they your goals? I guess to each is own, that is a bit extreme for me but I wish you the best of luck in ventures.

G352NV

iTrader: (13)

Make sure you use a primmer with self etch in it!

Osix350Z

iTrader: (2)

That's nuts man, when I look at the Z in those conditions.......
I just compare it to a small helpless boy being sodimized over and over...
Yeah, it's that bad..... But hey gotta do what you gotta do to run 9's, rape away!!

Audible Mayhem

iTrader: (48)

it all goes back together



yes i have goals of running 9s here in the near future. i was going to get a 5 point roll bar welded in but figured why have the car down two times if i am fortunate enough to get some traction...

i dont have any time off till wed but after that it is looking good on making some progress...

Audible Mayhem

iTrader: (48)

well i primered it today, i have never painted with real guns and an air compressor, its soooo much easier and looks really good. it will be painted super black first thing in the morning...

i am carpeting the whole floor from the seats back and everything else will be nice and super black. more pics tomorrow...


here are a few pics from my paint booth

Gumpdriver

iTrader: (5)

Man that cage is looking great. Keep up the good work.

Audible Mayhem

iTrader: (48)

thanks man, tomorrow it will look much better, a little sandin and a little paint...