07 base model, 6 spd, with vlsd, cat back exhaust and K&N drop ins. On street tires.

 

street tires, at that track 13.4=very well done. DR 1/10 to 2/10s - different track 1/10 to 2/10s. Before the season ends, why don't you get tires & try another track.

 

Top 25 Bolt-on HR list has been updated:
Added:
11. 350zhr -------------------------07 Base 6spd 13.418@104.99mph 2.078 60ft Verified Street

Dropped:
25. Skorch -------------------------07 Enth 6spd 13.792@102.79mph 2.098 60ft Verified Street

 

Hey Zim, I removed the pics in your above post.....Andre wanted to remove them. Just an FYI.

 

^^^ Not a problem! He had asked me to upload some pics and post them for him in here. He needed help/wasn't sure how to do it.

 

Wassup!!! Fellow Z owners. I'm my way to San Antonio Raceway to Midnight Madness!!! I'm gonna test out my Mickey Thompson ET Streets on my N/A HR.. I'll be sure to post up some times and vids...

 

^Well.....how'd it go?

 

I'm in the staging lanes right now but my first run was 13.5 at 105 2nd run was 13.2 @ 104 and 3rd 13.0 @ 105 I'm Hoping to get into the 12s I'm crossing my fingers!!!

 

Post up your best time slip and I will update the list some time tomorrow.

 

My clutch gave out and was grinding in 2nd everytime... I would like to know from all you experts- Can my quaife LSD be giving out? Cuz there is a burning smell from my rear end, take in mind I also have DSS 1200 hp rated Axles...

 

I really hope my problem is gonna be my CM FX300 Clutch and not my tranny. But that is my best time.

 

I'm sorry you have a mechanical situation. Hate to see one drag racer down-temporarily I'm sure. Your time is real good, & your 60' is very good. I've been working on traction. Can you tell me what tires your using. Can you share what mods you've got?

Thanks,
Andre

 

You have an 08 like I do. I had slave cylinder problems that ruined my clutch at 10k-smelled awfull. Dealer (under warranty) installed new slave cylinder. I paid for clutch & flywheel

 

What clutch and flywheel you using? I am using the clutchmasters FX300 with the stock flywheel and it started grinding in 2nd which clutch and fly would you recommend?

 

Updated Bolt-on HR list:
Added:
4. MM'08 350Z ----------------------08 Base 6spd 13.039@105.39mph 1.789 60ft Verified slicks

Dropped:
25. JR350z08 -----------------------08 Base 6spd 13.757@102.85mph 2.176 60ft Verifeid Street

 

I'll gladly help a racer(so few) as long as you don't beat my record
Sometimes less is better-I replaced my stock clutch with one from ACT & their performance organic street disc. Its great. Works as smooth as a stock one with more confidant feel & better wear. Don't know the number, but its easy to find, called heavy duty street.
As far as your 2nd. gear. Did you miss 2nd. once or twice? If you did then maybe you pulled the shifter straight down. I've learned that its best to pull down but toward you/down pulling in. Any new top name aluminum wheel would be fine.
good luck

 

Now, did you use the Hoosiers or M/T & size. Do you have 4.08 gears?

And congratulation

 

+1

Interested in MM's mods as well

 

Thanx andre, my tires were Mickeys ET Streets 27x10.5x15 on 15" Bogart D10s and D10 front runners with Et fronts. And yes I have 4.08s. But my friends in the stand said that while I was heating up the tires one of the tires would stay still while heating up and would continue to spin when I would let off the brake.

 

You have a base model. Base don't have CVTS old name posi-traction. I think if you get both wheels turning you'll beat my time. I only have 2 bolt ons. & don't have 4.08s

Thats alot of tire in the rear. Are the fronts those narrow ones. My front have 235-45-17 wider than stock. If you beat me, I'll have to spend some more money