Goals for 2010
Thread Starter
Registered User
iTrader: (3)
Joined: Dec 2008
Posts: 1,447
Likes: 0
From: Rapid City, SD Ellsworth AFB
Well my goal for 09 was to hit 13's stock. I accomplished this and now would love to see 12's with gears, bolt ons, and tune and an 11 on 125 shot. Slow, but it's an achievable goal for me.
Registered User
iTrader: (1)
Joined: Sep 2006
Posts: 5,568
Likes: 0
From: Get out my way pimpin, MD/PA
12's is going to be a lot harder than you think with bolt ons/tune.. very few have done it... a number of members have gotten very very close, and they are all great drivers..but its def. a hard goal to achieve. good luck...
my goals for 2010 is to reach 400hp. i think adding 5/16 motordyne plenum spacer should do the trick. hopefully i can sell my rims and get some 19 axis s5f and a cw lip kit so i can call this project good.
Trending Topics
Thread Starter
Registered User
iTrader: (3)
Joined: Dec 2008
Posts: 1,447
Likes: 0
From: Rapid City, SD Ellsworth AFB
Yea, hoping for some perfect DA's and swapping to a better tire should do the trick.
With an 03-06....you are going to need a DR or slick to get there on a stock long block. Trust me. It won't happen on street tires. If the temps are actually cold enough make 12 second power.....you won't get any traction.
Thread Starter
Registered User
iTrader: (3)
Joined: Dec 2008
Posts: 1,447
Likes: 0
From: Rapid City, SD Ellsworth AFB
I just changed my name but my times are somewhere in that thread. But I ran a 13.948 with 2.1 60' and hoping to make that a 13.5 with some ET streets and a 1.9 60' with some good DA's and track prep should definitely be possible.
Thread Starter
Registered User
iTrader: (3)
Joined: Dec 2008
Posts: 1,447
Likes: 0
From: Rapid City, SD Ellsworth AFB
It was 100. The run was with a pop charger but no heat shield. Going back to the stock intake and prostars with ET streets. My tires are worn and clutch doesn't like slipping so I was limited on my 60'. Should be good for 13.50's on et streets with 1.90.
So, I guess you decided to stick with the Z.....is it at PFS? They are about a 1/2 mile down the road from me. I still haven't swung by to check out the facility.






