Took my Z31 to the track Friday night
#1
Registered User
Thread Starter
Join Date: Sep 2008
Location: Keystone Heights, Fl
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
Took my Z31 to the track Friday night
I know its not my 350Z but I wanted to share. This is my Z31 300ZX it has been my project for years. I took it down the 1/4 for the first time on this setup Friday night at Alabama International. It was also my first time on slicks ever.
It was really busy at the track, about 45 minutes between passes wait time. My first pass I had to much air in the tires and it just spun. My second and final pass I dropped the pressure and it hooked. It also snatched itself all around the track and scared the hell out of me. The car has more in it, like I said first time on slicks and first time taking this setup down the track. So with practice I think it has a low 12 in it. I'm still on "low boost" too.
My setup
Stock bottom end 7.8:1 bottom end
HX35 @ 20psi
Schneider 274 cams and springs
JWT 3BAR ECU, Cobra MAF, 420CC injectors
Gutted plenum
3" Turbo back exhaust
23x11x3" IC
Fidanza Flywheel
DXD Clutch
Hoosier QTP 27x11.5x15
Other misc stuff
It was really busy at the track, about 45 minutes between passes wait time. My first pass I had to much air in the tires and it just spun. My second and final pass I dropped the pressure and it hooked. It also snatched itself all around the track and scared the hell out of me. The car has more in it, like I said first time on slicks and first time taking this setup down the track. So with practice I think it has a low 12 in it. I'm still on "low boost" too.
My setup
Stock bottom end 7.8:1 bottom end
HX35 @ 20psi
Schneider 274 cams and springs
JWT 3BAR ECU, Cobra MAF, 420CC injectors
Gutted plenum
3" Turbo back exhaust
23x11x3" IC
Fidanza Flywheel
DXD Clutch
Hoosier QTP 27x11.5x15
Other misc stuff
Last edited by OzzyRulez; 04-27-2014 at 07:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
Colombo
Forced Induction
35
11-09-2020 10:27 AM