Just another 350z drift build
#1
Registered User
Thread Starter
Join Date: May 2011
Location: Charlotte, NC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Just another 350z drift build
My name is Hayden, Im new to the boards and Z ownership but not all that new to drifting. I use to run an s13 with an s13 SR until I fenced it at XDC New Jersey. Right before qualifying I went to burn in a new set and check some changes and I ended up backing into the wall on the bank. the rear quarter caved onto the wheel and the cage and frame twisted. The car lasted for 4 years and I had a blast.
For the 2011 season I have acquired an 03 350z track edition.
I played around with it at streetwise in December and had a blast, I cant wait to see how the car feels with almost triple the horsepower and properly set up.
I began stripping it down with the help of some friends to prepare for soda blasting
Since soda blasting, Autosport Dynamics has begun transforming my 350z from a local drift event beater into a first class burnout machine for XDC and the Streetwise Drift Pro-Am series. Thankfully, Falken’s contract with ASD only restricts them from building a competitor’s Formula Drift Pro car.
Jesse Wisner, an ASD fabricator who isn’t involved with the Falken Drift Program, has been hard at work prepping the car. This will be the 3rd 350z built by ASD, not counting the rebuild on Tyler’s retired pro car for ASD mechanic Steve Sokol.
Jesse has over 80 feet of tubing in the car and is tig welding the cage as well as other components. He is new to drifting, but obviously not new to welding and fabrication; he has been involved in building race cars for many years. Here is his fabrication work on the steering shaft and Wilwood pedal mount.
The cage is complete and only a few more components are left to fabricate before the car heads to paint. Dave from ASD approves!
I originally planned to swap a basic LS1 set up in the car, but I was given an opportunity I couldn’t refuse. ASD has taken on the task of fitting a Dodge Nationwide engine into the Z. The engine has been converted to electronic fuel injection managed by a Haltech P2000 from ASD and tuned by Six Sigma Dyno Services.
For the 2011 season I have acquired an 03 350z track edition.
I played around with it at streetwise in December and had a blast, I cant wait to see how the car feels with almost triple the horsepower and properly set up.
I began stripping it down with the help of some friends to prepare for soda blasting
Since soda blasting, Autosport Dynamics has begun transforming my 350z from a local drift event beater into a first class burnout machine for XDC and the Streetwise Drift Pro-Am series. Thankfully, Falken’s contract with ASD only restricts them from building a competitor’s Formula Drift Pro car.
Jesse Wisner, an ASD fabricator who isn’t involved with the Falken Drift Program, has been hard at work prepping the car. This will be the 3rd 350z built by ASD, not counting the rebuild on Tyler’s retired pro car for ASD mechanic Steve Sokol.
Jesse has over 80 feet of tubing in the car and is tig welding the cage as well as other components. He is new to drifting, but obviously not new to welding and fabrication; he has been involved in building race cars for many years. Here is his fabrication work on the steering shaft and Wilwood pedal mount.
The cage is complete and only a few more components are left to fabricate before the car heads to paint. Dave from ASD approves!
I originally planned to swap a basic LS1 set up in the car, but I was given an opportunity I couldn’t refuse. ASD has taken on the task of fitting a Dodge Nationwide engine into the Z. The engine has been converted to electronic fuel injection managed by a Haltech P2000 from ASD and tuned by Six Sigma Dyno Services.
Last edited by HHorton; 05-24-2011 at 01:07 PM.
#2
Registered User
iTrader: (1)
Join Date: Nov 2008
Location: lafayette, louisiana
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
like like like
def going to keep an eye on this
i have a 350z (daily) and s13 (track car)
wish i had the cash to build the z instead of the 240, but parts are too damn cheap
def going to keep an eye on this
i have a 350z (daily) and s13 (track car)
wish i had the cash to build the z instead of the 240, but parts are too damn cheap
Trending Topics
#11
Registered User
Thread Starter
Join Date: May 2011
Location: Charlotte, NC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of the subrame with the winters quickchange and ASD solid mounts in it. I will get a pic of it fully together with the arms and Driveshaft shop axels installed.
http://www.flickr.com/photos/60720557@N02/5758685591/http://www.flickr.com/photos/60720557@N02/5758685591/ by http://www.flickr.com/people/60720557@N02/, on Flickr
http://www.flickr.com/photos/60720557@N02/5758685591/http://www.flickr.com/photos/60720557@N02/5758685591/ by http://www.flickr.com/people/60720557@N02/, on Flickr
#13
Registered User
iTrader: (4)
Join Date: Sep 2010
Location: Gilroy, ca
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of the subrame with the winters quickchange and ASD solid mounts in it. I will get a pic of it fully together with the arms and Driveshaft shop axels installed.
photo by HaydenHorton, on Flickr
photo by HaydenHorton, on Flickr
So much win.