3.9 and 4.08 Final Drive Kits in Stock!
#169
any problems with these guys?
Just wondering if anyone has tried to order anything from these guys lately and are having problems with payments or receiving parts. Whats going on guys?
#170
Former Sponsor
Thread Starter
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
ttt!!
3.9 AND 4.08's now back in stock! We can also package them with ALL the required install parts you need for a full, complete, reliable installation process.
3.9 AND 4.08's now back in stock! We can also package them with ALL the required install parts you need for a full, complete, reliable installation process.
#178
Former Sponsor
Thread Starter
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
We've got both the 3.9 and 4.08 Final Drive sets in stock for your 350Z!
If you've been looking for a great bang for the buck mod, it gets no better than these new ring and pinions!
4.08 ring and pinion: $590 shipped
4.08 + Install kit 1 (crush collar, pinion seal, pinion nut): $615 shipped
4.08 + Install kit 1 + Install kit 2 (new output shaft bearings, pinion bearings, ring gear bolts, side flange seals (highly recommended for cars with more than 25k milesand/or where you don't want any guesswork involved, ) - $900 shipped
3.9 ring and pinion: $790.00 shipped
3.9 + Install Kit 1 (crush collar, pinion seal, pinion nut): $815 shipped
3.9 + Install Kit 1 + Install kit 2 (new output shaft bearings, pinion bearings, ring gear bolts, side flange seals (highly recommended for cars with more than 25k milesand/or where you don't want any guesswork involved) - $1100 shipped
Pricing is inside the 48 states - for locations outside the 48 states, contact us with your full address
If you need the installation parts separately, we can supply those as well. At a minimum, you need the Install Kit #1 to put either of these into your car If your car has very low miles (under 25k or so), you can probably get away with just the Install Kit #1. If your car has more miles, or you don't want to rely on your installer having to reuse parts Nissan says are use-once (such as ring gear bolts, bearing seals, etc) we would highly recommend you also purchase Install Kit #2. Install kit 2 has all the bearings/seals, and new ring gear bolts as well, and combined with Kit 1, will give you all brand new hardware, etc for the full pumpkin - it's the best way to go and covers all bases. Each of the install kits is sold separately.
Got a tech question about the gears, please refer to this stickied thread:
https://my350z.com/forum/engine-and-drivetrain/301451-4-083-gears-final-drive-installed.html
Orders can be placed by giving us a call at 631-863-3820
Thanks!
If you've been looking for a great bang for the buck mod, it gets no better than these new ring and pinions!
4.08 ring and pinion: $590 shipped
4.08 + Install kit 1 (crush collar, pinion seal, pinion nut): $615 shipped
4.08 + Install kit 1 + Install kit 2 (new output shaft bearings, pinion bearings, ring gear bolts, side flange seals (highly recommended for cars with more than 25k milesand/or where you don't want any guesswork involved, ) - $900 shipped
3.9 ring and pinion: $790.00 shipped
3.9 + Install Kit 1 (crush collar, pinion seal, pinion nut): $815 shipped
3.9 + Install Kit 1 + Install kit 2 (new output shaft bearings, pinion bearings, ring gear bolts, side flange seals (highly recommended for cars with more than 25k milesand/or where you don't want any guesswork involved) - $1100 shipped
Pricing is inside the 48 states - for locations outside the 48 states, contact us with your full address
If you need the installation parts separately, we can supply those as well. At a minimum, you need the Install Kit #1 to put either of these into your car If your car has very low miles (under 25k or so), you can probably get away with just the Install Kit #1. If your car has more miles, or you don't want to rely on your installer having to reuse parts Nissan says are use-once (such as ring gear bolts, bearing seals, etc) we would highly recommend you also purchase Install Kit #2. Install kit 2 has all the bearings/seals, and new ring gear bolts as well, and combined with Kit 1, will give you all brand new hardware, etc for the full pumpkin - it's the best way to go and covers all bases. Each of the install kits is sold separately.
Got a tech question about the gears, please refer to this stickied thread:
https://my350z.com/forum/engine-and-drivetrain/301451-4-083-gears-final-drive-installed.html
Orders can be placed by giving us a call at 631-863-3820
Thanks!