Southbend Clutch/Flywheel Combo + Free Bonus Parts, $1 Shipping, NO CHATTER!!! :)

Thread Tools

Search this Thread

01-14-2011, 11:03 AM

Coz@CZP

Sponsor
Concept Z Performance

Thread Starter

iTrader: (24)

Join Date: Sep 2002

Location: Arizona

Posts: 705

Likes: 0

Received 0 Likes on 0 Posts

Southbend Clutch/Flywheel Combo + Free Bonus Parts, $1 Shipping, NO CHATTER!!! :)

New Southbend Flywheel are designed to replace the OEM Dual Mass flywheel. These flywheels also do not chatter like aluminum flywheels, and you still get a weight savings of 5lbs. This Solid Piece 4140 Billet Steel is very durable, and can take a beating from Puck clutches. Total weight including ring gear is 24lbs.

Southbend Clutches come in a variety of TQ Specs, so there is a Clutch out there for everybody. Stage 1-3 are OEM if not lighter feel, stage 4-5 are going to come with a SS pressure plate, and are slightly heavier then stage 1-3, but I could barely feel the pressure difference.

*Each Kit comes with Chromoly Pivot Ball, Stainless Steel Clutch Line, and Pilot Needle Bearing. Shipping is $1 for 3day Service*
_________________________

Southbend 350Z Combo Stage 1 (435 TQ) Rally Clutch / Flywheel Combo

_________________________

Southbend 350Z Combo Stage 2 (486 TQ) TZ Clutch / Flywheel

_________________________

Southbend 350Z Combo Stage 3 (530 TQ) OFE Clutch / Flywheel

_________________________

Southbend 350Z Combo Stage 4 (650 TQ) OFE-SS Clutch / Flywheel

_________________________

Southbend 350Z Combo Stage 5 (800TQ) FE Clutch / Flywheel

_________________________

Southbend 350Z Combo Stage 5 (763 TQ) DXD-B Ceramic 6-Puck Clutch / Flywheel

_________________________

Southbend 350Z Combo Stage 5 (825 TQ) DXD-F Feramic 6-Puck Clutch / Flywheel

_________________________

Redline MT-85 (4-Pack) - 350Z, $43.20

Description: Recommended for Nissan 350Z, 370Z, G35, and G37
* Safe for brass synchros, as it lacks the reactive sulfurs found in most GL-5 oils that cause damage
* Offers quicker shifts, perfect synchronizer coefficient of friction * Eliminates notchy shifting, even when cold
* High performance gear protection and longer synchro life
* Recommended for GL-1, GL-3 and GL-4 applications, as well as where most special synchromesh fluids are specified
* Satisfies the gear oil viscosity requirements of 75W, 80W, 85W and motor oil viscosities of SAE 30 and 5W30.

Includes 4 Quarts to complete the Job
_________________________

Nissan OEM 350Z Rear Main Seal

Description: This is a great time to replace your rear main seal, saves time and money if your rear main seal decides to leak after you finish your clutch install.
_________________________

We also have Southbend Clutch Combos with Fidanza Light Weight Flywheels:

Southbend / Fidanza 350Z/G35 DXD Clutch/Flywheel Combo - Rally Series (435 TQ Cap)