FS: Used JWT flywheel $300, Southbend DXD SS TZ clutch/pp $400
Thread Starter
Joined: Apr 2005
Posts: 15,390
Likes: 1,085
From: Greenville, SC
Used JWT flywheel $300, Southbend DXD SS TZ clutch/pp $400
For sale are two used drivetain pieces for the 2003-2006 VD35DE engine/transmission
Reason for selling is I went with a OS Giken Twin with a higher tq capacity
No dibs
Buyer pays shipping and paypal fee. Insurance is required.
No gift payments
Address must be verified!
If i dont like you or something about the deal i reserve the right to call it off. Dont be fishy. My itrader speaks for itself.
Used parts sold AS-IS. If you want more pics or have a question then ask.
Southbend DXD SS TZ clutch:
USED
No TOB or pilot bushing
Looks to be in great shape. Under 5k miles.
What you see is what you get.
It is a sprung disk (made by excdy) and drives like stock.
Rated for 57 lb-ft
When new, this goes for 550. Sell for $350 plus shipping and paypal ect
https://conceptzperformance.com/Cart...n.php?II=17037
JWT Flywheel:
Under 5k miles.
Looks like some starter engagement/grind on the teeth but should be an issue. All teeth are present.
When new these go for 400 https://conceptzperformance.com/Cart...ion.php?II=322
Will sell for $300 plus paypal and shipping ect
Reason for selling is I went with a OS Giken Twin with a higher tq capacity
No dibs
Buyer pays shipping and paypal fee. Insurance is required.
No gift payments
Address must be verified!
If i dont like you or something about the deal i reserve the right to call it off. Dont be fishy. My itrader speaks for itself.
Used parts sold AS-IS. If you want more pics or have a question then ask.
Southbend DXD SS TZ clutch:
USED
No TOB or pilot bushing
Looks to be in great shape. Under 5k miles.
What you see is what you get.
It is a sprung disk (made by excdy) and drives like stock.
Rated for 57 lb-ft
When new, this goes for 550. Sell for $350 plus shipping and paypal ect
https://conceptzperformance.com/Cart...n.php?II=17037
JWT Flywheel:
Under 5k miles.
Looks like some starter engagement/grind on the teeth but should be an issue. All teeth are present.
When new these go for 400 https://conceptzperformance.com/Cart...ion.php?II=322
Will sell for $300 plus paypal and shipping ect
Trending Topics
Thread Starter
Joined: Apr 2005
Posts: 15,390
Likes: 1,085
From: Greenville, SC
I would say yes to using it as is. The only reason i pulled it was to go to a twin clutch which comes with its own flywheel.
it should be compatible with all single plate clutches for the 350z. but always be sure to research.