Twin Turbo Anybody??
#22
I have the APS TT on my G35, but I'm in Ottawa. I am still using the Unichip. I made 449whp with it (slighltly detuned now) and I've been running it for almost 2 years. It was tuned in Chicago, but I really want to find someone reliable closer. I'm stating to look for a used block around because I want to build my engine eventually.
Later,
Later,
#24
Originally Posted by Madelinot
I have the APS TT on my G35, but I'm in Ottawa. I am still using the Unichip. I made 449whp with it (slighltly detuned now) and I've been running it for almost 2 years. It was tuned in Chicago, but I really want to find someone reliable closer. I'm stating to look for a used block around because I want to build my engine eventually.
Later,
Later,
I was cruising with 2 other SB Z's today, and one of them had an APS TT setup. I must say, it was quite fast.
Keep us posted clem,
R
#25
Originally Posted by Madelinot
So,clemlover15, you're replacing the Unichip with UTEC? How is that done? Any problem with the wiring and interface?
Thanks!
Thanks!
They said that they can tune my Utec for sure but the Cobb maybe better, so I might be selling the UTEC. The engine is way behind so that delay could be worth it for a better ECU.
#26
Originally Posted by Madelinot
I have the APS TT on my G35, but I'm in Ottawa. I am still using the Unichip. I made 449whp with it (slighltly detuned now) and I've been running it for almost 2 years. It was tuned in Chicago, but I really want to find someone reliable closer. I'm stating to look for a used block around because I want to build my engine eventually.
Later,
Later,
Yes I will be selling my complete engine thats in the car right now, I bought a spare one to build. The motor is a 2006 rev-up with 7000kms. The one I bought was almost intendical it might of had few 100 less kms. My Shop found it from Nissan, it had spun a bearing and was warranteed so my shop picked it up real cheap.
It did however need a new crank which was an unexpected expence.
But if you are thinking about building your motor get a spare one, I can still drive mine while the motor is getting done. If you pull your motor the car will sitting there for weeks, plus added expense of storage and towing eff that $hit.
#27
Originally Posted by Reality350
Clem has an '06 engine for sale, in case you are interested.
I was cruising with 2 other SB Z's today, and one of them had an APS TT setup. I must say, it was quite fast.
Keep us posted clem,
R
I was cruising with 2 other SB Z's today, and one of them had an APS TT setup. I must say, it was quite fast.
Keep us posted clem,
R
Dude where did you see these other APS TT's I have to see them!!! Are they in the GTA???? Built motor or stock??
I've trying to find an APS TT in toronto forever!
Last edited by clemlover15; 01-13-2007 at 06:36 PM.
#28
Originally Posted by Madelinot
I have the APS TT on my G35, but I'm in Ottawa. I am still using the Unichip. I made 449whp with it (slighltly detuned now) and I've been running it for almost 2 years. It was tuned in Chicago, but I really want to find someone reliable closer. I'm stating to look for a used block around because I want to build my engine eventually.
Later,
Later,
Who did the tune in Chicago GRD? How do you like the kit?? Any ¼ mile times you want to share. Also I'm using the APS tuner kit, I knew I was going to upgrade to a CJM return fuel kit and an upgraded ecu so that’s why I got the tuner version.
But there is nothing wrong with the Unichip at all the UTEC and now possibly the cobb ecu just have more ability and access to vital tuning parameters.
#29
Yes, GRD. I love the kit. Over 35,000km on it since the install. No problem whatsoever and I drive the living crap out of it.
Pics: http://www.science.uottawa.ca/~paul/G35/TwinTurbo/
I did 12.7@115. My main problem: traction, or complete lack thereof.
Later,
Pics: http://www.science.uottawa.ca/~paul/G35/TwinTurbo/
I did 12.7@115. My main problem: traction, or complete lack thereof.
Later,
#30
Dude pics are great thanks, thats an awsome time!! Get some drag radials and the traction problem is gone.
I have the same exhaust to it great!!
I'm assuming 8-10PSI?
check ur PM
I have the same exhaust to it great!!
I'm assuming 8-10PSI?
check ur PM
Last edited by clemlover15; 01-13-2007 at 07:22 PM.
#31
Yes, around 8.5psi right now (9psi when it's cold). I got some better tires before I stored my car for the Winter (Nittos). I'll see how they perform in the Spring.
Going FI really transform these cars into beasts.
Later,
Going FI really transform these cars into beasts.
Later,
#32
Here are some vids for those interested:
http://videos.streetfire.net/video/4...E1B299E942.htm
http://videos.streetfire.net/video/9...C576FC5D9B.htm
http://videos.streetfire.net/video/8...83CD0FA882.htm
http://videos.streetfire.net/video/8...15F38D0014.htm
With stock exhaust and stock slipping clutch:
http://videos.streetfire.net/video/C...0EDE6E98F4.htm
http://videos.streetfire.net/video/5...CD1DACE100.htm
I have a few other if you want...
http://videos.streetfire.net/video/4...E1B299E942.htm
http://videos.streetfire.net/video/9...C576FC5D9B.htm
http://videos.streetfire.net/video/8...83CD0FA882.htm
http://videos.streetfire.net/video/8...15F38D0014.htm
With stock exhaust and stock slipping clutch:
http://videos.streetfire.net/video/C...0EDE6E98F4.htm
http://videos.streetfire.net/video/5...CD1DACE100.htm
I have a few other if you want...
Last edited by Madelinot; 01-13-2007 at 07:33 PM.
#33
Originally Posted by clemlover15
Dude where did you see these other APS TT's I have to see them!!! Are they in the GTA???? Built motor or stock??
I've trying to find an APS TT in toronto forever!
I've trying to find an APS TT in toronto forever!
I am sure you two will meet at the local gatherings once the nice weather hits. You on torontonissan.ca?
If not, sign up!. We setup a cruise last minute, and it was a blast (pun). Also some nice pics were posted up on that forum.
Cheers,
R
#34
Originally Posted by Madelinot
Here are some vids for those interested:
http://videos.streetfire.net/video/4...E1B299E942.htm
http://videos.streetfire.net/video/9...C576FC5D9B.htm
http://videos.streetfire.net/video/8...83CD0FA882.htm
http://videos.streetfire.net/video/8...15F38D0014.htm
With stock exhaust and stock slipping clutch:
http://videos.streetfire.net/video/C...0EDE6E98F4.htm
http://videos.streetfire.net/video/5...CD1DACE100.htm
I have a few other if you want...
http://videos.streetfire.net/video/4...E1B299E942.htm
http://videos.streetfire.net/video/9...C576FC5D9B.htm
http://videos.streetfire.net/video/8...83CD0FA882.htm
http://videos.streetfire.net/video/8...15F38D0014.htm
With stock exhaust and stock slipping clutch:
http://videos.streetfire.net/video/C...0EDE6E98F4.htm
http://videos.streetfire.net/video/5...CD1DACE100.htm
I have a few other if you want...
Good job on walking the buick, and nice timeslips!
#35
Originally Posted by Reality350
Hes a member of this forum, but I am not sure if he wants to be named. IIRC, he 's running 9 psi, on a stock block. 3" aps exhaust, running a unichip.
I am sure you two will meet at the local gatherings once the nice weather hits. You on torontonissan.ca?
If not, sign up!. We setup a cruise last minute, and it was a blast (pun). Also some nice pics were posted up on that forum.
Cheers,
R
I am sure you two will meet at the local gatherings once the nice weather hits. You on torontonissan.ca?
If not, sign up!. We setup a cruise last minute, and it was a blast (pun). Also some nice pics were posted up on that forum.
Cheers,
R
#36
I have a few other if you want...[/QUOTE]
send them all they great!!! I love the first ever run, I've thinking about my first run a lot!! Great time with drag radials will help you get into the low 12's easy you drive!!!
thanks for sharing
send them all they great!!! I love the first ever run, I've thinking about my first run a lot!! Great time with drag radials will help you get into the low 12's easy you drive!!!
thanks for sharing
#37
Begging for traction:
http://www.nalley.ca/ncsc/Luskville_...aunch1.avi.avi
http://www.nalley.ca/ncsc/Luskville_...launch.avi.avi
I was really trying to feather the throttle... no way. That track sucks ***** too.
http://www.nalley.ca/ncsc/Luskville_...aunch1.avi.avi
http://www.nalley.ca/ncsc/Luskville_...launch.avi.avi
I was really trying to feather the throttle... no way. That track sucks ***** too.
#38
#40
Originally Posted by clemlover15
I love the first ever run, I've thinking about my first run a lot!! Great time with drag radials will help you get into the low 12's easy you drive!!!
I know it could run low 12s with traction.
This Winter, I'm spending some $ doing cosmetic mods: Kuruma Z Bumper (which will also help the intercooler), Impul side skirts, rear skirts, etc. It was coompletely stock looking up to now.
Last edited by Madelinot; 01-14-2007 at 08:59 AM.