LF: Built N/A motor
#6
New Member
Thread Starter
iTrader: (4)
Join Date: May 2004
Location: Mississauga
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Internals:
Weisco Pistons (.020 over stock)
Eagle rods
ARP rod bolts
Fully balanced and blueprinted - not only balanced as individual components, but also balanced as a rotating assembly
OE Nissan bearings
Full Ported and polished heads
5 angle valve job (stock Nissan valves)
Tomei 268 cams (268 duration, 10.5mm lift)
NISMO valvesprings
NISMO headgaskets
Lots of time spent porting stock, non rev up lower plenum -we logged over 100 hours between the heads and plenum, going off recommendations from MCR Japan, as well as things we found on our own.
Motordyne 1/4 inch spacer
ATI crank pulley
New: water pump, rev up oil pump, idler pullies (OEM)
All included? And how many km on the motor right now?
Pm me your price ship to Canada.
Thanks
Weisco Pistons (.020 over stock)
Eagle rods
ARP rod bolts
Fully balanced and blueprinted - not only balanced as individual components, but also balanced as a rotating assembly
OE Nissan bearings
Full Ported and polished heads
5 angle valve job (stock Nissan valves)
Tomei 268 cams (268 duration, 10.5mm lift)
NISMO valvesprings
NISMO headgaskets
Lots of time spent porting stock, non rev up lower plenum -we logged over 100 hours between the heads and plenum, going off recommendations from MCR Japan, as well as things we found on our own.
Motordyne 1/4 inch spacer
ATI crank pulley
New: water pump, rev up oil pump, idler pullies (OEM)
All included? And how many km on the motor right now?
Pm me your price ship to Canada.
Thanks
#7
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
the motor has 10k miles on it, can include a new Haltech with wideband (new), Racepack dash, as well as JDM cluster (9k rpm tach), 370cc injectors, Cosworth plenum, ARC oil pan. Optionally can include OS Giken Super Single clutch/flywheel (aluminum cover version)
as I said, make an offer - no point in me setting a price if you're not in the ballpark
as I said, make an offer - no point in me setting a price if you're not in the ballpark
Last edited by Z1 Performance; 05-28-2009 at 05:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM