Is there an easier way to get the crank pulley off? The bolt is off but i cant get the pulley off, ive been pulling on it from every angle and i tryed prying it off with screwdrivers and still nothing. i know its not supposed to be this hard, im going on 2 hours of trying to get it installed.

 

I just finised this mod as well. If possible, have a friend use a screwdriver from the top through the engine bay and you use one from the bottom underneath the car. It should come off doing that.

 

how hard is the install for the pulleys? did u have to remove the radiator? any DIY guides online??? i am very interesting in doing this myself but ive heard if u mess it up, it could mean big trouble...any suggestions during install or guides?

Ben

 

Wasn't very difficult, but i had a lift and another person to help me. The hardest part was getting the pulley off. Besides that it was really quite easy. Just make sure you have a torque wrench and some patience. No need to remove radiator.

 

how long did the install take?? very curious....also what tools were needed for the install...i hate being not prepared for a job...please give some feedback if possible....thanks

Ben

 

the install should have only been about a half hour. i used this as a guidelinehere.

 

It only took me just over an hour or so for the install. Getting the pulley bolt loose was the toughest part for me. The pulley itself just came right off.

When I tried to help bud with his pulley install, we couldn't get the pulley off no matter what we tried. He tried prying it from the top while I tried from the bottom at the same time. We ended up having to put the belts back on. He was going to a shop to have it done.

 

thats exactly what im doing..

 

you guys need a pulley puller

 

You can pick one up at most any auto parts store. I bought one from Advance, if I remember correctly. The guy told me that I could return it when I was finished...I kept it, though.

|dg