Top 5 mods that won't void warranty?
#1
Registered User
Thread Starter
iTrader: (13)
Join Date: Apr 2005
Location: B'ham Al
Posts: 1,949
Likes: 0
Received 0 Likes
on
0 Posts
Top 5 mods that won't void warranty?
Are there 5 that can be done to increase HP but, not void my warranty? What mods and by whom are they made?
Nismo exhaust
Piggyback ECU
Intake, which one is best?
What else?
And yes, i am new to this so i can't really get all the abbreviations yet and don't know what i am doing. This is my 1st sports car. I know, 36 year old noob but, i learn quick.
Nismo exhaust
Piggyback ECU
Intake, which one is best?
What else?
And yes, i am new to this so i can't really get all the abbreviations yet and don't know what i am doing. This is my 1st sports car. I know, 36 year old noob but, i learn quick.
#2
Registered User
Join Date: Jul 2004
Location: Florida
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Actually, you can do anything to your car and not void your warranty. The only time you will run into a problem is if whatever mod you do is a dirrect result in some kind of malfunction. Atleast thats how it has been interprited to me.
#4
Sponsor
Forged Internals.com
Forged Internals.com
Originally Posted by 1 2 NV
Actually, you can do anything to your car and not void your warranty. The only time you will run into a problem is if whatever mod you do is a dirrect result in some kind of malfunction. Atleast thats how it has been interprited to me.
#5
piggyback ecu?? that would pretty much kill your warranty man.... you have to start splicing wires from your ecu to install the piggyback ecu.... gotta be the worst thing to do in terms of trying to maintain your warranty.
#7
Sponsor
Forged Internals.com
Forged Internals.com
Originally Posted by jkoc
piggyback ecu?? that would pretty much kill your warranty man.... you have to start splicing wires from your ecu to install the piggyback ecu.... gotta be the worst thing to do in terms of trying to maintain your warranty.
Trending Topics
#8
Registered User
Thread Starter
iTrader: (13)
Join Date: Apr 2005
Location: B'ham Al
Posts: 1,949
Likes: 0
Received 0 Likes
on
0 Posts
Crap, i hate the politics of this.
What piggyback doesn't require splicing? Why can't they make plugs to go in between the harness and jacks? Wouldn't that be the easiest thing?
What about Unorthodox pulley sets?
I will not touch my suspension, mine has the feathering problem. 10,000 and the tires were shot, just had them replaced last week. Those bastards will pay for it if it happens again.
So, to be safe, all i can really do is cold air and a freaking Nismo bumber sticker?!!!! Great.
What piggyback doesn't require splicing? Why can't they make plugs to go in between the harness and jacks? Wouldn't that be the easiest thing?
What about Unorthodox pulley sets?
I will not touch my suspension, mine has the feathering problem. 10,000 and the tires were shot, just had them replaced last week. Those bastards will pay for it if it happens again.
So, to be safe, all i can really do is cold air and a freaking Nismo bumber sticker?!!!! Great.
#9
350Z-holic
iTrader: (22)
Join Date: Jul 2003
Location: Texas
Posts: 13,983
Likes: 0
Received 0 Likes
on
0 Posts
Basically any S-Tune installed by NIssan is warrantied, Click Here, R-Tune is not covered, headers, cams, ect!
http://www.nissanusa.com/content/0,,...anding,00.html
http://www.nissanusa.com/content/0,,...anding,00.html
#10
Sponsor
Forged Internals.com
Forged Internals.com
Originally Posted by DayBlueZ
Crap, i hate the politics of this.
What piggyback doesn't require splicing? Why can't they make plugs to go in between the harness and jacks? Wouldn't that be the easiest thing?
What about Unorthodox pulley sets?
I will not touch my suspension, mine has the feathering problem. 10,000 and the tires were shot, just had them replaced last week. Those bastards will pay for it if it happens again.
So, to be safe, all i can really do is cold air and a freaking Nismo bumber sticker?!!!! Great.
What piggyback doesn't require splicing? Why can't they make plugs to go in between the harness and jacks? Wouldn't that be the easiest thing?
What about Unorthodox pulley sets?
I will not touch my suspension, mine has the feathering problem. 10,000 and the tires were shot, just had them replaced last week. Those bastards will pay for it if it happens again.
So, to be safe, all i can really do is cold air and a freaking Nismo bumber sticker?!!!! Great.
#11
Registered User
Thread Starter
iTrader: (13)
Join Date: Apr 2005
Location: B'ham Al
Posts: 1,949
Likes: 0
Received 0 Likes
on
0 Posts
The only thing i see is Cat back exhaust as far as increasing HP. Is that all they offer? I thought they make a CAI and a Different plenium.
The reason i am wanting more is because a kid pulled to me at the redlight in a little Honda with the big *** wing, dials all in the dash, big ole mufflers sticking out and i didn't beat him by far. Maybe half a car length.
I would have stopped to talk but, just before he pulled to light i got the drop on a 20mph go. He pulled to the light and i heard him say " OK, *****, " something something, and if i stopped to talk to him i would have had to crumple him up and shove him in his trunk till he smelled funny.
The reason i am wanting more is because a kid pulled to me at the redlight in a little Honda with the big *** wing, dials all in the dash, big ole mufflers sticking out and i didn't beat him by far. Maybe half a car length.
I would have stopped to talk but, just before he pulled to light i got the drop on a 20mph go. He pulled to the light and i heard him say " OK, *****, " something something, and if i stopped to talk to him i would have had to crumple him up and shove him in his trunk till he smelled funny.
#12
the burninator
iTrader: (11)
he had half a car lenth on your stock Z eh?
you'll need about 8hp to stay even with him and about 10-15hp to be half a car length ahead of him
easiest way to do that is:
intake (jwt popcharger recommended)
angled plenum spacer
high flow cats (recommend crawford)
exhaust
should cost about $2000 for all parts and installation (try installing them yourself if you can)
I'd also recommend upgrading the suspension ASAP to avoid your tires feathering again - because they will. Better tires will just make it take longer to happen
you'll need about 8hp to stay even with him and about 10-15hp to be half a car length ahead of him
easiest way to do that is:
intake (jwt popcharger recommended)
angled plenum spacer
high flow cats (recommend crawford)
exhaust
should cost about $2000 for all parts and installation (try installing them yourself if you can)
I'd also recommend upgrading the suspension ASAP to avoid your tires feathering again - because they will. Better tires will just make it take longer to happen
Last edited by sentry65; 04-13-2005 at 07:41 PM.
#14
Sponsor
Forged Internals.com
Forged Internals.com
Go here for NISMO parts...good selection...good prices (discounts for forum members too). I would do R-Tune...frankly, I don't think most dealer will know. http://performancenissanparts.com/ca...sort=2a&page=1
#17
Registered User
iTrader: (6)
Join Date: Aug 2004
Location: Eltmann, Franconia
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
If you want to stay warrantied no matter what,
Nismo S-Tune Suspension
Nismo wheels (unless you have a track model, this will reduce rotating mass)
Nismo S-Tune exhaust (full system = Y-pipe back)
Nismo CAI (cold air intake)
Nismo Lightweight Flywheel and Clutch
All purchased from and installed by your dealer.
you will still have tire feathering problems, in fact it will probably get worse with the lowering of the car... but you will be covered until the end of your warranty on any part. One thing I don't know is that if you have a nismo part that goes bad, does the dealer replace the nismo part or replace the stock part under warranty? (can someone chime in, please?)
Once the warranty runs out, get front A-arms and rear camber arms to fix the tire feathering problem... then start modding the crap out of the Z
My $0.02
Nismo S-Tune Suspension
Nismo wheels (unless you have a track model, this will reduce rotating mass)
Nismo S-Tune exhaust (full system = Y-pipe back)
Nismo CAI (cold air intake)
Nismo Lightweight Flywheel and Clutch
All purchased from and installed by your dealer.
you will still have tire feathering problems, in fact it will probably get worse with the lowering of the car... but you will be covered until the end of your warranty on any part. One thing I don't know is that if you have a nismo part that goes bad, does the dealer replace the nismo part or replace the stock part under warranty? (can someone chime in, please?)
Once the warranty runs out, get front A-arms and rear camber arms to fix the tire feathering problem... then start modding the crap out of the Z
My $0.02
#18
Registered User
Join Date: Jan 2005
Location: Hoover, Alabama
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
DayBlueZ you gotta meet up with us sometime... Ninja-Z, Zachcrosen, and I hook up and cook out, go to Steele to drag race, etc. and hang out with some other tuner guys (STi, Evo, 300zx, NSX, etc. type people). I am moving back to Hoover at the end of the month, currently in Oneonta.
#19
Sponsor
Sport Z Magazine
Sport Z Magazine
Originally Posted by DayBlueZ
The only thing i see is Cat back exhaust as far as increasing HP. Is that all they offer? I thought they make a CAI and a Different plenium.
The reason i am wanting more is because a kid pulled to me at the redlight in a little Honda with the big *** wing, dials all in the dash, big ole mufflers sticking out and i didn't beat him by far. Maybe half a car length.
I would have stopped to talk but, just before he pulled to light i got the drop on a 20mph go. He pulled to the light and i heard him say " OK, *****, " something something, and if i stopped to talk to him i would have had to crumple him up and shove him in his trunk till he smelled funny.
The reason i am wanting more is because a kid pulled to me at the redlight in a little Honda with the big *** wing, dials all in the dash, big ole mufflers sticking out and i didn't beat him by far. Maybe half a car length.
I would have stopped to talk but, just before he pulled to light i got the drop on a 20mph go. He pulled to the light and i heard him say " OK, *****, " something something, and if i stopped to talk to him i would have had to crumple him up and shove him in his trunk till he smelled funny.
#20
Registered User
Thread Starter
iTrader: (13)
Join Date: Apr 2005
Location: B'ham Al
Posts: 1,949
Likes: 0
Received 0 Likes
on
0 Posts
Yea, i've noticed the quicker pocket road-rockets cruizing around here. This one had to be moded. At least i hope it was. I really don't want to lose to a stock welfare wagon. I'm just new to the whole thing and couldn't tell if it was a stock machine.
Sounds good xephiron, just PM me and i'll find some time to get around.
Sounds good xephiron, just PM me and i'll find some time to get around.