individual throttle bodies
06-06-2005, 01:22 PM
#87
Sponsor
Forged Internals.com
Forged Internals.com
Honda owners also have free reflash software, don't remember what the company is called. Aftermarket parts for Honda's are cheap and plentiful because there are so many owners looking to modify. Probably 20-30% of 350Z owners modify their 350Z. And probably 1-2% want ITB's, to give a more real estimate it's probably more like less than 1%. (just to note, i'd say that ~3% of 350Z owners go F/I also)
07-19-2005, 12:28 PM
#89
Sponsor
Forged Internals.com
Forged Internals.com
Originally Posted by nuff
Any updates? or was it just loads of vapour?
07-19-2005, 07:41 PM
#92
Registered User
iTrader: (1)
Join Date: May 2004
Location: Alexandria, VA
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z350Lover
sentry65,
This can all be avoided by having an airbox made to cover those ITBs... that's not a big deal at all if the ITBs is out, custom box can be made and all of those ITBs will be using just one air filter... same as what euro E36 and current E46 M3 are doing. You don't even need to get a hood with a scoop at all and still, collecting cold air from the front air dam will be more than enough!
And that was what I was told by the mech. here in Melbourne... they can custom-made a CF air box for the setup!
cheers,
richie
This can all be avoided by having an airbox made to cover those ITBs... that's not a big deal at all if the ITBs is out, custom box can be made and all of those ITBs will be using just one air filter... same as what euro E36 and current E46 M3 are doing. You don't even need to get a hood with a scoop at all and still, collecting cold air from the front air dam will be more than enough!
And that was what I was told by the mech. here in Melbourne... they can custom-made a CF air box for the setup!
cheers,
richie
PS-E36 M3 in the US made ~250HP with a 3.2L Euro M3's made ~350 with a 3.0L Now that's hawwwt!
Last edited by dynamic6er; 07-19-2005 at 07:45 PM.
07-19-2005, 08:14 PM
#93
Registered User
iTrader: (2)
Join Date: Jan 2003
Location: Australia
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dynamic6er
Ahhh..good man. You know the Bimmers. But also the E28 and E24 M5 and 6 (1986/7 thru 1989). Also the E34 M5 and I think the E38 M5.
PS-E36 M3 in the US made ~250HP with a 3.2L Euro M3's made ~350 with a 3.0L Now that's hawwwt!
PS-E36 M3 in the US made ~250HP with a 3.2L Euro M3's made ~350 with a 3.0L Now that's hawwwt!
I know about it because I used to own a AC Schnitzer Euro E36 3.2L M3 (everything schnitzer)... loved the m3 n/a power so much, so I gotta have the z pulling out as much as the m3 or even more.... I have just done it...
cheers,
richie
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
Extreme Dimensions
Southern California
0
09-24-2015 03:35 PM
