Carbon Fiber cold air Induction system. 10 HP Gain!
Thread Starter
Vendor - Former Vendor
iTrader: (121)
Joined: Oct 2002
Posts: 2,363
Likes: 0
From: NY
This new ram air intake system has been dyno tested on a stock Z with no modification. This system will let you intake get direct air from the stock front air vent. Intake will not get any hot air from the engine bay. Wet Carbon fiber construct box will cover up the intake. Below are photos and dyno chart.






Am I just reading this wrong? The chart you posted seems to indicate a loss everwhere but 6000 rpm, where there is a marginal gain.
According to the chart it seems before is the pre carbon fiber intake and after is post. I just don't see how that chart backs their claims.
According to the chart it seems before is the pre carbon fiber intake and after is post. I just don't see how that chart backs their claims.
Last edited by PerfectOddz; May 15, 2005 at 07:27 AM.
Trending Topics
Originally Posted by mikedZ33
Ya, lol it looks like an excel chart. I smell BS about the 10hp gain.
this is just the latest version of a scam.. 10 hp gain from what looks like a much smaller filter area riiiiight
you could find a better one on ebay i bet
Thread Starter
Vendor - Former Vendor
iTrader: (121)
Joined: Oct 2002
Posts: 2,363
Likes: 0
From: NY
Yea, I'm not sure about 10HP it is direct from manufacture. But I'm sure it does some good to our Z. The carbon box front is direct connect to stock airdam. So you are getting direct fresh air.
well, the stock intake takes direct cold air too.....
The Gruppe-M, or any long tube cold air that places the filter in the bumper will still yield the most 'cold air", but none of those gain 10 whp either.
The Gruppe-M, or any long tube cold air that places the filter in the bumper will still yield the most 'cold air", but none of those gain 10 whp either.
Originally Posted by JDMZ33
This new ram air intake system has been dyno tested on a stock Z with no modification. This system will let you intake get direct air from the stock front air vent. Intake will not get any hot air from the engine bay. Wet Carbon fiber construct box will cover up the intake. Below are photos and dyno chart.







Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM





