Notices
Engine & Drivetrain VQ Power and Delivery

Dyno Result Of Most Common Bolt-ons!!!

Old Jan 10, 2006 | 09:39 PM
  #21  
Zivman's Avatar
Zivman
New Member
iTrader: (19)
 
Joined: Jun 2003
Posts: 7,179
Likes: 27
From: MPLS/ST.Paul MN
Default

Originally Posted by InsaneChink
wow, damn.... i didnt know i was gonna get lynched and ****.

Location: Church Automotive (Wilmington, CA)
Type: DynoPack
Total pulls: 2

1st pull:
WHP: 262.2 HP
Torque: 250 ft/lb

2nd pull (BEST ONE):
WHP: 267.9 HP
Torque: 254.9 ft/lb

what do you think guys? I was acutally kinda disappointed. I thought for sure i would be at least >270HP. But looking at all your guesses, it seems i WAS a bit optimistic. Lets hear all your opinions...
For those mods, those numbers are high by about 20 hp
Reply
Old Jan 11, 2006 | 05:53 AM
  #22  
PoWeRtRiP's Avatar
PoWeRtRiP
Registered User
 
Joined: May 2003
Posts: 2,906
Likes: 1
From: jacksonville, FL
Default

Originally Posted by InsaneChink
wow, damn.... i didnt know i was gonna get lynched and ****.

Location: Church Automotive (Wilmington, CA)
Type: DynoPack
Total pulls: 2

1st pull:
WHP: 262.2 HP
Torque: 250 ft/lb

2nd pull (BEST ONE):
WHP: 267.9 HP
Torque: 254.9 ft/lb

what do you think guys? I was acutally kinda disappointed. I thought for sure i would be at least >270HP. But looking at all your guesses, it seems i WAS a bit optimistic. Lets hear all your opinions...
without a baseline those numbers are worthless. i could have a z that dynoes 220whp on a mustang that is faster than youre 260 on a dynapack. its just a tuning tool

btw where is the curve?
Reply
Old Jan 11, 2006 | 05:55 AM
  #23  
Alberto's Avatar
Alberto
Cranky FI Owner
Premier Member
iTrader: (14)
 
Joined: Mar 2003
Posts: 34,715
Likes: 8
From: DMV
Default

Dynapacks read high, and Church Automotive is known for a "happy" dyno, so imo your numbers are low. 267whp on a dynojet SAE would be in the high 240's, thats weaksauce imo....

BTW for what its worth 2 local STOCK Z's here on dynapacks dyno'd 256 and 259whp...
Reply
Old Jan 11, 2006 | 05:59 AM
  #24  
Robert_K's Avatar
Robert_K
Didn't Go Cheap
Premier Member
iTrader: (25)
 
Joined: Oct 2005
Posts: 12,390
Likes: 101
From: Spring, TX
Default

I was going to mention that it need to be a baseline from the same dyno as well. None-the-less congrats on your upgrades.
Reply
Old Jan 11, 2006 | 08:03 AM
  #25  
InsaneChink's Avatar
InsaneChink
Thread Starter
Registered User
iTrader: (8)
 
Joined: Jul 2005
Posts: 872
Likes: 0
From: Los angeles
Default

1. Dyno-pack does read higher than Dynojet. According to Shawn at Church Automotive, stock Z's that he's dyno'd have consistantly been getting ~252 base WHP. So basically w/ my mods its about a 10-15WHP gain. Which sounds about right.

2. No i dont have a baseline, so in a way they are kinda worthless, but this post was not to brag about how much i gained but just for informative purposes. Like i said early, i was VERY DISAPPOINTED and was acutally expecting higher results for all the money that i've dropped in already. I just want to give newer members a more realistic expectation on their planned mods.

funny side note:
there was a white 94' TURBO integra re-built engine, forged internals, etc, etc. That's puttin down 290WHP. Crazy... but he was watching my dyno with me and after the results came out we kinda both were just shaking our heads in disappointment.
Reply
Old Jan 11, 2006 | 08:11 AM
  #26  
barthelb's Avatar
barthelb
Master
Premier Member
 
Joined: Nov 2004
Posts: 2,517
Likes: 0
From: California
Default

I never got a baseline with my car but with Nismo exhaust it made 236whp on a dyno jet. I then added a pop charger and a Nismo Header and it made 247whp and 239ft.lbs. So a 15hp ft.lb gain should be good. But its where you made that power. At the top it doesn't really matter. Now you need a Unichip or some EM to maximize those gains.

Originally Posted by InsaneChink
1. Dyno-pack does read higher than Dynojet. According to Shawn at Church Automotive, stock Z's that he's dyno'd have consistantly been getting ~252 base WHP. So basically w/ my mods its about a 10-15WHP gain. Which sounds about right.

2. No i dont have a baseline, so in a way they are kinda worthless, but this post was not to brag about how much i gained but just for informative purposes. Like i said early, i was VERY DISAPPOINTED and was acutally expecting higher results for all the money that i've dropped in already. I just want to give newer members a more realistic expectation on their planned mods.

funny side note:
there was a white 94' TURBO integra re-built engine, forged internals, etc, etc. That's puttin down 290WHP. Crazy... but he was watching my dyno with me and after the results came out we kinda both were just shaking our heads in disappointment.
Reply
Old Jan 11, 2006 | 08:23 AM
  #27  
InsaneChink's Avatar
InsaneChink
Thread Starter
Registered User
iTrader: (8)
 
Joined: Jul 2005
Posts: 872
Likes: 0
From: Los angeles
Default

yea, the main reason i did the dyno was to take it to TS for the reflash. But now i considering going to test pipes before the flash. Shawn at Church automotive said that my headers are kinda useless unless i take out my cats...
Reply
Old Jan 11, 2006 | 11:39 AM
  #28  
DomZ's Avatar
DomZ
Registered User
 
Joined: Mar 2005
Posts: 4,038
Likes: 0
From: NJ
Default

Originally Posted by Alberto
Dynapacks read high, and Church Automotive is known for a "happy" dyno, so imo your numbers are low. 267whp on a dynojet SAE would be in the high 240's, thats weaksauce imo....

BTW for what its worth 2 local STOCK Z's here on dynapacks dyno'd 256 and 259whp...
I could swear I hear something about Church dynoing high too....do they screw up their calibrations just to make their customers happy?
Reply
Old Jan 11, 2006 | 11:39 AM
  #29  
RNL323's Avatar
RNL323
Mod My Ride
Premier Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 500
Likes: 0
From: THE BAY AREA
Default

+1 for a Unichip or reflash or another EM

What were your AF ratio?
Reply
Old Jan 11, 2006 | 11:42 AM
  #30  
Zivman's Avatar
Zivman
New Member
iTrader: (19)
 
Joined: Jun 2003
Posts: 7,179
Likes: 27
From: MPLS/ST.Paul MN
Default

Originally Posted by DomZ
I could swear I hear something about Church dynoing high too....do they screw up their calibrations just to make their customers happy?

but that's just it, he said he was disappointed in his #s

for his mods, those numbers are CRAZY high
Reply
Old Jan 11, 2006 | 11:48 AM
  #31  
InsaneChink's Avatar
InsaneChink
Thread Starter
Registered User
iTrader: (8)
 
Joined: Jul 2005
Posts: 872
Likes: 0
From: Los angeles
Default

Originally Posted by RNL323
+1 for a Unichip or reflash or another EM

What were your AF ratio?

AFR: 15.72
Reply
Old Jan 11, 2006 | 11:51 AM
  #32  
Zivman's Avatar
Zivman
New Member
iTrader: (19)
 
Joined: Jun 2003
Posts: 7,179
Likes: 27
From: MPLS/ST.Paul MN
Default

Originally Posted by InsaneChink
AFR: 15.72
he should have been more specific and asked for your AFR chart, not at it's highest point.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lapham3
Maintenance & Repair
8
Oct 7, 2022 03:15 PM
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
Rev_Night
Wheels & Tires
30
Nov 7, 2020 06:00 PM
3vilbunny
Exterior & Interior
24
Jul 18, 2017 05:10 PM
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 04:05 AM.