Ultimate Racing VQ35 Heads
#41
Registered User
Join Date: Apr 2006
Location: Out There --->
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Having a quick look at the turbo specs of that kit (60-1 I belive)
You would have to be pretty big on the exhaust housing AR to get close to that sort of hp.
Injs are WAAAAAAAAAAAAAAY too small as is fuel pump.
What you runnign ECU wise?
You would have to be pretty big on the exhaust housing AR to get close to that sort of hp.
Injs are WAAAAAAAAAAAAAAY too small as is fuel pump.
What you runnign ECU wise?
#43
New Member
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Riyadh, SA
Posts: 1,295
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spanners
Having a quick look at the turbo specs of that kit (60-1 I belive)
You would have to be pretty big on the exhaust housing AR to get close to that sort of hp.
Injs are WAAAAAAAAAAAAAAY too small as is fuel pump.
What you runnign ECU wise?
You would have to be pretty big on the exhaust housing AR to get close to that sort of hp.
Injs are WAAAAAAAAAAAAAAY too small as is fuel pump.
What you runnign ECU wise?
As far as the ECU I will be runing TurboXS UTEC
On the exhaust side I will be venting the WG and on teh exhaust I will have a VES system which basicly vents the exhaust under boost
As far as the injectors and fuel setup, why do you say they are way too small? If you would calculate fuel requirments based on a BSFC of 0.61 and IDC of 85% you would need 1000cc with an FPR of 1:1 ..... Could you please explain...
#46
Registered User
Join Date: Apr 2006
Location: Out There --->
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aalzuhair
The turbo will a 60-1 Hi Fi with a 62-1 wheel.
As far as the ECU I will be runing TurboXS UTEC
On the exhaust side I will be venting the WG and on teh exhaust I will have a VES system which basicly vents the exhaust under boost
As far as the injectors and fuel setup, why do you say they are way too small? If you would calculate fuel requirments based on a BSFC of 0.61 and IDC of 85% you would need 1000cc with an FPR of 1:1 ..... Could you please explain...
As far as the ECU I will be runing TurboXS UTEC
On the exhaust side I will be venting the WG and on teh exhaust I will have a VES system which basicly vents the exhaust under boost
As far as the injectors and fuel setup, why do you say they are way too small? If you would calculate fuel requirments based on a BSFC of 0.61 and IDC of 85% you would need 1000cc with an FPR of 1:1 ..... Could you please explain...
Typo or you only have one? If one, no way in hell you're going to get there.
IIRC correctly, the kit comes with 380cc injs.
Most you'll see out them with a bump in base pressure is around 450-500hp atw.
Walbro 255... no comment.. 2x Bosch 044s would be my pic. 4.Xl/min at pressure each..
1000cc injs.. yes.. but I don't/didn't see that on your list
#47
New Member
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Riyadh, SA
Posts: 1,295
Likes: 0
Received 0 Likes
on
0 Posts
No, its TurboS .. .sorry ... and yes I will run 1000cc Peak and Hold using the stock ECU and the UTEC
I know the Walbros are not the best... but they have to do for now
I know the Walbros are not the best... but they have to do for now
#48
Registered User
Join Date: Apr 2006
Location: Out There --->
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Upgrade the pump/s and throw the UTEC away (sorry) and I think you're on the way to your targets.
Whats the AR and frame of the exhaust housing?
Exh wheels trim?
Whats the AR and frame of the exhaust housing?
Exh wheels trim?
#50
Registered User
iTrader: (55)
Join Date: Nov 2004
Location: ORLANDO, FL
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spanners
Upgrade the pump/s and throw the UTEC away (sorry) and I think you're on the way to your targets.
Whats the AR and frame of the exhaust housing?
Exh wheels trim?
Whats the AR and frame of the exhaust housing?
Exh wheels trim?
Thread
Thread Starter
Forum
Replies
Last Post