i have searched for about 15 minutes and cant find what im looking for.... i just got done installing samco hoses and have air in the system. i was trying to bleed it here at the house but i cant find anything to direct me to do it here at the house... can anyone hel pme with this?

 

Shouldn't really be anything special. I've done several sets of Samcos and haven't had any problem with air. You can try "burping" the upper hose by squeezing it a few times to push some air/coolant through. You can always let the car run for a bit with the radiator cap off as long as you don't let the car get super hot.

 

this is the first one that ive done that i got air in the system... i have heard there is a valve to open as its running that releases air. but im not sure where to find it and im not at work

 

This may be a stupid question, but couldn't you just call the dealership that you work for and talk to one of your techs?

 

if someone was there i could... when i called earlier i couldnt get anyone on the phone but my parts dept and they didnt know. and now we are closed...

 

Good instructions for bleeding at the end of this how-to...

http://crackaddict.com/~flynn/howtos...amco.howto.htm

 

PM me with your email address and I can send you the FSM Cooling section.

 

The tee your looking for is on the passenger side right near the heater hose in the back. Follow the hose from your heater core next to the battery.

 

thats exactly what i was looking for! guess i was in the wrong forum... thought i saw it in here...

thanks man

 

fixed... thanks guys