Project ARC..Engine bay build in progress..
#1
Administrator
Thread Starter
iTrader: (25)
Project ARC..Engine bay build in progress..
Awhile back, when deciding on what components to go with, I decided on ARC. Definitely not the easiest path taken. After being on the forums awhile and given the quality of ARC parts I decided to decorate the engine bay entirely with ARC. It's been a slow process, definitely due to $$$, but is close to completion now.
Recently I picked up the ARC cooler, which should be arriving sometime this week. Thank you Andy, @ Performance Nissan.
Other components that will arrive in the next week are the Ti Strut bar and V2 oil catch can. Thank you Marty, from Injected Performance. Injected Performance has always been a great supplier for me. We've completed many business transactions and I'm always please with their professionalism and service.
Here's a couple pics of the Ti strut bar. I pulled them from another website. They were the best pics I could find for the meantime.
Here's a pic of the ARC V2 oil catch that will be arriving along side the Ti strut bar. (Pic curtesy of member = CESAROTORRES)
I already own the green on silver oil cap.
Day one... I began by getting the car up in the air and stable. Removing the front bumper was a peice of cake. A few screws, but mostly pop off clips. As you can see, I've already installed the ARC radiator panel.
Here's a couple pics of the bumper parts. They'll be laying around for a week or so.
I'm going to post some more photos I took in a few minutes. I'm having a delimma on cutting the front grill out to make room for the cooler and need some opinions.
Val
Recently I picked up the ARC cooler, which should be arriving sometime this week. Thank you Andy, @ Performance Nissan.
Other components that will arrive in the next week are the Ti Strut bar and V2 oil catch can. Thank you Marty, from Injected Performance. Injected Performance has always been a great supplier for me. We've completed many business transactions and I'm always please with their professionalism and service.
Here's a couple pics of the Ti strut bar. I pulled them from another website. They were the best pics I could find for the meantime.
Here's a pic of the ARC V2 oil catch that will be arriving along side the Ti strut bar. (Pic curtesy of member = CESAROTORRES)
I already own the green on silver oil cap.
Day one... I began by getting the car up in the air and stable. Removing the front bumper was a peice of cake. A few screws, but mostly pop off clips. As you can see, I've already installed the ARC radiator panel.
Here's a couple pics of the bumper parts. They'll be laying around for a week or so.
I'm going to post some more photos I took in a few minutes. I'm having a delimma on cutting the front grill out to make room for the cooler and need some opinions.
Val
#2
Administrator
Thread Starter
iTrader: (25)
Ok, here's the delimma.
I can cut along the yellow line or the red line. The red line is the easiest by far, but it will leave some abnormal patterns/gaps along the side edge of the bumper. If I cut along the yellow line, this ensures a clean removal of all the black plastic of the front grill. The only thing is, it is a long tedious cut all the way around the inner portion of the bumper. It's a no brainer that the yellow line cut will be the cleanest though. Can anyone offer advise on making the yellow line cut, if I choose to go this route?
Thanks guys.
#3
Registered User
iTrader: (12)
Join Date: Apr 2003
Location: Costa Mesa, CA
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
how about cutting the red, then using the cut off pieces to back-fill the gaps, and bondo/body filler to smooth it all out, then paint it black, and voila! you have a black border all around -- might be more work than it's worth, though. otherwise I'd cut at the yellow.
#4
Administrator
Thread Starter
iTrader: (25)
Originally Posted by blaukal
how about cutting the red, then using the cut off pieces to back-fill the gaps, and bondo/body filler to smooth it all out, then paint it black, and voila! you have a black border all around -- might be more work than it's worth, though. otherwise I'd cut at the yellow.
#5
General & Tech Senior Moderator
MY350Z.COM
MY350Z.COM
iTrader: (74)
Nice selection on parts. ARC deff. is top notch. I am also in the quest for some ARC goodies. I just bought the Gold(make the gold riams) oil and rad cap.
Are you going FI or NA. ARC air box and pipe in Marketplace Just a heads up for the ARC ******
Chris
Are you going FI or NA. ARC air box and pipe in Marketplace Just a heads up for the ARC ******
Chris
#6
Administrator
Thread Starter
iTrader: (25)
Originally Posted by NA&CH
Nice selection on parts. ARC deff. is top notch. I am also in the quest for some ARC goodies. I just bought the Gold(make the gold riams) oil and rad cap.
Are you going FI or NA. ARC air box and pipe in Marketplace Just a heads up for the ARC ******
Chris
Are you going FI or NA. ARC air box and pipe in Marketplace Just a heads up for the ARC ******
Chris
I'm staying NA. I know the cooler is overkill. I'm using it stickly for show application.
The super induction box and pipe are next on my hit list after I recover from this....
Trending Topics
#8
Administrator
Thread Starter
iTrader: (25)
Originally Posted by srt4-no more
is that and ARC oil cooler!?!
#9
General & Tech Senior Moderator
MY350Z.COM
MY350Z.COM
iTrader: (74)
Originally Posted by vo7848
The gold cap seems like a nice match for the rims.
I'm staying NA. I know the cooler is overkill. I'm using it stickly for show application.
The super induction box and pipe are next on my hit list after I recover from this....
I'm staying NA. I know the cooler is overkill. I'm using it stickly for show application.
The super induction box and pipe are next on my hit list after I recover from this....
Recover. Like surgery
COngrats on teh parts again.
Chris
#14
Administrator
Thread Starter
iTrader: (25)
Originally Posted by Wired 24/7
holy crap! can I be your nephew or something?
#15
Administrator
Thread Starter
iTrader: (25)
Originally Posted by SuperBlack350
nice stuff. How much did that ARC oil cooler set you back?
Originally Posted by SuperBlack350
Also, i hope you had that car on jack stands and not just the jack by itself.
#16
Registered User
iTrader: (59)
Join Date: Feb 2007
Location: Raleigh, North Carolina
Posts: 8,517
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by vo7848
$1740 shipped
It's on jack stands. I just have the jack there for added safety. The rear wheels are chaulk also...
It's on jack stands. I just have the jack there for added safety. The rear wheels are chaulk also...
wow, props on that buy. It's such a nice and rare mod though.
Good to know you are doing the right and safe way. Good luck. Subscribing to this thread.
#17
Administrator
Thread Starter
iTrader: (25)
Originally Posted by SuperBlack350
wow, props on that buy. It's such a nice and rare mod though.
Good to know you are doing the right and safe way. Good luck. Subscribing to this thread.
Good to know you are doing the right and safe way. Good luck. Subscribing to this thread.
I'll keep you guys posted with pics as the project progresses.
#19
Administrator
Thread Starter
iTrader: (25)
Originally Posted by nexstage350
snap! it has begun! LOL