sun auto hyper force
#4
Banned
iTrader: (45)
Join Date: May 2007
Location: NYC / Tokyo | '04 TT Z
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Which component do you need instructions for? If it is the Voltage stabilizer, you can PM me your email and I can send it to you.
I can say though that if you have and 04+ the bracket is a bit different than what the kit was originally designed for. I personally had to cut/drill into the bracket it is suppose to mount on to make it work.
I can say though that if you have and 04+ the bracket is a bit different than what the kit was originally designed for. I personally had to cut/drill into the bracket it is suppose to mount on to make it work.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Oct 2007
Location: san diego
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
i got the hyper force and hyper voltage for 140 used and he sold it because of a family emergency. i already have the voltage installed now i just need to put the hyper force
#10
New Member
iTrader: (2)
Originally Posted by Zyuhlater
i got the hyper force and hyper voltage for 140 used and he sold it because of a family emergency. i already have the voltage installed now i just need to put the hyper force
#12
Registered User
iTrader: (25)
Originally Posted by undrgnd
Put back in shipping carton, return to sender.
Originally Posted by undrgnd
Oh yeah, the dreaded voltage instability issue for the 350Z. Glad that's behind us! With the hyper force installed, you should have all major performance parameters on this car addressed.
Or better yet, dont post if you have nothing positive to add.
Seeing your sarcasm on every forum in which you post is getting old, we were all noobs at one time or another... I am sure you could have just pointed him to google.
OP, just google it, I am sure its out their somewhere.
#13
New Member
iTrader: (2)
Originally Posted by Reality350
How about you offer some useful advice instead of bagging on everyones posts.
Or better yet, dont post if you have nothing positive to add.
Seeing your sarcasm on every forum in which you post is getting old, we were all noobs at one time or another... I am sure you could have just pointed him to google.
OP, just google it, I am sure its out their somewhere.
Or better yet, dont post if you have nothing positive to add.
Seeing your sarcasm on every forum in which you post is getting old, we were all noobs at one time or another... I am sure you could have just pointed him to google.
OP, just google it, I am sure its out their somewhere.
#16
Registered User
Thread Starter
Join Date: Oct 2007
Location: san diego
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
iTrader: (109)
Join Date: Sep 2005
Location: Huntersville, NC
Posts: 2,153
Likes: 0
Received 0 Likes
on
0 Posts
Its really simple one long wire goes connected to the positive battery terminal the other ones attach to the front upper part of the engine then just piggy back every ignition coil wire and plug it into the unit which goes mounted to the bracket on the passengers side in front of the strut bar. Its really easy and instructions are not really needed, I did mine without them but if you want I can take pics of my booklet and e-mail you the pics this afternoon?
#19
New Member
iTrader: (2)
Originally Posted by Zyuhlater
here's my e-mail obillo23@yahoo.com....anybody with instructions please send it to me thanks