vq35 vs vq35HR
#42
Registered User
iTrader: (12)
Originally Posted by Gooey
And like I said I went to the track last week and ran a 13.079@108.90mph with a 1.9 60' That was with me wheel hoppin through first gear. .
LOL~ It's all in fun. Don't sweat it. :-)
Last edited by gothchick; 03-06-2008 at 06:32 AM.
#43
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
Actually I do have the timeslips. And I have 2 members on the forums that were there. I dont bs my timeslips or go talkin about what my car can do because someone else on the board has the same mods as I do.
If you want ill take a picture of the slip tonite when I get home from work. I didnt scan it because its still didnt beat my pb.
So for like the 5th time, Wheres your timeslips?
If you want ill take a picture of the slip tonite when I get home from work. I didnt scan it because its still didnt beat my pb.
So for like the 5th time, Wheres your timeslips?
#44
Registered User
iTrader: (12)
Originally Posted by Gooey
Actually I do have the timeslips.
I don't do 1/4 mile, but I did post my dyno for your viewing pleasure. :-)
I also posted many other bolton DE timeslips, and they're still faster than the fastest HRs.
Maybe that'll change someday ~ Maybe not. We'll see.
Last edited by gothchick; 03-06-2008 at 06:37 AM.
#47
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
ok and I have my dynos. Same shop dynos.
my 06 revvup motor + Nismo catback, test pipes, JWT popcharger, MREV++, 3/8 spacer.
Dynoed at 241rwhp/238rwtq
Ill ask the shop to send me the file again.
Same shop I dynoed my 07 with just exhaust, and intake, no gears
Dynoed at 281rwhp/241rwtq
same shop dyno
my 06 revvup motor + Nismo catback, test pipes, JWT popcharger, MREV++, 3/8 spacer.
Dynoed at 241rwhp/238rwtq
Ill ask the shop to send me the file again.
Same shop I dynoed my 07 with just exhaust, and intake, no gears
Dynoed at 281rwhp/241rwtq
same shop dyno
#48
Registered User
iTrader: (12)
Originally Posted by SOLO-350Z
Your dyno is screwed up like we said. Where is your time slip? Without one you can't say crap.
Here's the top bolton time slips for ya - again. Read it and weep.
The top Bolton DEs
Alberto ----------03 Trac 6spd 13.131@107.15mph 1.895 60ft Slicks
Sfarrah ----------03 Enth 6spd 12.876@107.81mph 1.750 60ft DR's
Supra Crazy -----03 Trac 6spd 13.572@107.10mph 2.175 60ft Street
The top Bolton HRs
Gooey ----------- 07 Enth 6spd 12.947@107.11mph 1.796 60ft Verified DR's
WalkerT---------- 07 Base 6spd 13.424@105.14mph 2.145 60ft Verified street
Seb-Specialty-Z-- 07 Enth Auto 13.556@104.17mph 2.045 60ft Verified DR's
Last edited by gothchick; 03-06-2008 at 06:42 AM.
#49
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
hope you know how much work was put into Sfarrah's car to hit those times. He did a lot of suspension work so it gets the best launch is can. His motor is puttin out 300rwhp. Alot more than your average DE motor.
Now I have 3 bolt on's and I will beat his time probably this weekend or the next depending on the weather. Im running stock intake boxes now and the car is pickin up a lot more on the last 1/8. I hope you shut your mouth when I post my new timeslips in the coming weeks
Now I have 3 bolt on's and I will beat his time probably this weekend or the next depending on the weather. Im running stock intake boxes now and the car is pickin up a lot more on the last 1/8. I hope you shut your mouth when I post my new timeslips in the coming weeks
Last edited by Gooey; 03-06-2008 at 06:46 AM.
#51
Registered User
iTrader: (12)
Originally Posted by Gooey
ok and I have my dynos. Same shop dynos.
my 06 revvup motor + Nismo catback, test pipes, JWT popcharger, MREV++, 3/8 spacer.
Dynoed at 241rwhp/238rwtq
Ill ask the shop to send me the file again.
Same shop I dynoed my 07 with just exhaust, and intake, no gears
Dynoed at 281rwhp/241rwtq
same shop dyno
my 06 revvup motor + Nismo catback, test pipes, JWT popcharger, MREV++, 3/8 spacer.
Dynoed at 241rwhp/238rwtq
Ill ask the shop to send me the file again.
Same shop I dynoed my 07 with just exhaust, and intake, no gears
Dynoed at 281rwhp/241rwtq
same shop dyno
People seem to like timeslips for "Ownage" comparisons, so I've posted them up. The HR doesn't "Own" the DE at all.
Maybe that'll change someday ~ Maybe not. We'll see.
Last edited by gothchick; 03-06-2008 at 06:51 AM.
#53
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gothchick
Every engine dynos differently. Some low, some high, some are factory freaks. Your arument is pointless.
Only thing I see a lot of shops doing is settin their parameters higher to show higher output to make their customers happy.
When you dyno a DE and HR on the same dyno on the same day please come back.
#55
'12 TL SH-AWD
iTrader: (26)
And again you are just making yourself look like a idiot.
The top Bolton DEs
Alberto ----------03 Trac 6spd 13.131@107.15mph 1.895 60ft Slicks
Sfarrah ----------03 Enth 6spd 12.876@107.81mph 1.750 60ft DR's
Supra Crazy -----03 Trac 6spd 13.572@107.10mph 2.175 60ft Street
The Top Stock HRs
Pat Bateman --------07 Base 6spd 13.465@106.86mph 2.227 60ft
Veetec -------------07 Base 6spd 13.198@105.71mph 1.971 60ft
Peak350 ------------07 Enth 6spd 13.239@105.67mph 1.923 60ft
No drag tires, no mods at ALL. And they all beat Supra Crazy. And Veetec basically got the same as Alberto BONE STOCK. Sean and Alberto probably have over 10k+ in mods on their cars. Sean is a friend of mine and he has a crap load done to his car.
Drag radials normally get you anywhere from .2-.4 in the 1/4 better. Take that way, and they are SLOWER than a STOCK HR with all those bolt ons.
And Gooey, she is a chick, you know how they think they are always right and even when proven wrong they will keep running their mouth off.
The top Bolton DEs
Alberto ----------03 Trac 6spd 13.131@107.15mph 1.895 60ft Slicks
Sfarrah ----------03 Enth 6spd 12.876@107.81mph 1.750 60ft DR's
Supra Crazy -----03 Trac 6spd 13.572@107.10mph 2.175 60ft Street
The Top Stock HRs
Pat Bateman --------07 Base 6spd 13.465@106.86mph 2.227 60ft
Veetec -------------07 Base 6spd 13.198@105.71mph 1.971 60ft
Peak350 ------------07 Enth 6spd 13.239@105.67mph 1.923 60ft
No drag tires, no mods at ALL. And they all beat Supra Crazy. And Veetec basically got the same as Alberto BONE STOCK. Sean and Alberto probably have over 10k+ in mods on their cars. Sean is a friend of mine and he has a crap load done to his car.
Drag radials normally get you anywhere from .2-.4 in the 1/4 better. Take that way, and they are SLOWER than a STOCK HR with all those bolt ons.
And Gooey, she is a chick, you know how they think they are always right and even when proven wrong they will keep running their mouth off.
Last edited by SOLO-350Z; 03-06-2008 at 06:59 AM.
#57
Registered User
iTrader: (12)
Originally Posted by Gooey
hope you know how much work was put into Sfarrah's car to hit those times. He did a lot of suspension work so it gets the best launch is can. His motor is puttin out 300rwhp.
Originally Posted by Gooey
I hope you shut your mouth when I post my new timeslips in the coming weeks
Last edited by gothchick; 03-06-2008 at 07:06 AM.
#58
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SOLO-350Z
And Gooey, she is a chick, you know how they think they are always right and even when proven wrong they will keep running their mouth off.
hhaha so true. I completely forgot Im arguing with a lady. Lost cause. I lose!
This is how I broke up with my girlfriend. I had to keep gettin my point through because I'm usually right and she wouldn't give up either. I have to learn to let the women win an argument
#60
New Member
iTrader: (18)
Join Date: Dec 2005
Location: MD
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gothchick
Do you have a link to this dyno?
If it's legit, I'll gladly shut my mouf. I just get so sick of the endless bs and posturing from people trying to be all l33t when they ain't. It hurtz when they get brought down a peg.
If it's legit, I'll gladly shut my mouf. I just get so sick of the endless bs and posturing from people trying to be all l33t when they ain't. It hurtz when they get brought down a peg.
Well I dont have new a PB time yet but heres my current one for now
I pretty much live at the track on the weekends so beatin their times will just come in time.
Last year my car only picked up 22-23mph in the last 1/8. Im thinking because of the crappy a/f I was gettin with the aftermarket intakes. This year with the stock intake box Im pickin up 25+mph on the back 1/8