alright, got my new motor and turbos in, and ran into a few problems..

my new motor and harness is a revup. my old block didnt have this sensor (above the oil filter..believe its an oil sensor of some sort)...there is no plug on the main harness for this. i looked for awhile, and nothing


the only plug thats fits that fitting above are these 2, which are not on the main engine harness, but near the passenger side fenderwell, which i bvelieve are for the windshield washer resevoir




second, i swapped over the 2 cam sensors from my de, and purchased 2 new sensors as well (revup has 4) i have the black clips on the outside, green on the inside..is this the right order? also the outside black clip doesnt plug into the driver side outermost cam sensor... there is a tab, if i file this down it will fit..but will it work correctly?


underneath now, on the harness where the o2 sensors plug in, there are 2 more extra clips, that i have no idea where they run to..help me out here



and lastly, anybody have a ***** of a time getting the intake piping for the greddy turbos on? the a/c compressor and p/s keep getting in the way

sorry for the plethora of questions but i tried searching and couldnt find the answers. just hope everything works out well lol. thanks for all the help guys!

 

Pretty sure that is an oil temp. sensor in the first pic. I'm also pretty sure some of the wires in the passenger fenderwell are for the two windshield washer motors (front and rear) and one is for the level sensor.

 

yea thats what i thought, cant find a damn plug for that sensor! this car is driving me nuts!

 

bump, help me out guys!

 

nobody knows?

 

man, i would suggest getting another buddy over with a rev up motor Z and working backwards ensuring you have all the right connections....i cant imagine why your rev up harness wouldnt have the connection for your rev up motor

-J

 

those extra o2 harnesses coming from the o2 sensor area you talk about get connected to the tranny dont they??? check a buddies car....

 

thats what i though, but there is no connections for them, and i have a cd009 too

 

more info please!