running lean
#53
Booooosstt!!
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
Maxmood, just logged my cipher today. My second part ( after 27XXX ) starts with CD.
Hope that helps.
Edit:
03threefiftyz,
Is there way that i can look into Rev limiter via cipher? I tried find it but had no luck. (Maybe i can look via osiris tuner?)
Hope that helps.
Edit:
03threefiftyz,
Is there way that i can look into Rev limiter via cipher? I tried find it but had no luck. (Maybe i can look via osiris tuner?)
Last edited by Chef-J; 08-25-2009 at 02:18 PM.
#54
thnx Chef.. the problem is, with all those part numbers i got, it doesn't seems to match with what Nissan got on their website. there isn't such thing as 27xxx-CFxxx (which are the numbers most of u guys got from the dealer).. i'll just wait for Mike's attempt at getting the number.
about the rev limiter, you can set it with cipher as well as with osiris standard.
just download the manual and read it out.
about the rev limiter, you can set it with cipher as well as with osiris standard.
just download the manual and read it out.
#55
Booooosstt!!
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
thnx Chef.. the problem is, with all those part numbers i got, it doesn't seems to match with what Nissan got on their website. there isn't such thing as 27xxx-CFxxx (which are the numbers most of u guys got from the dealer).. i'll just wait for Mike's attempt at getting the number.
about the rev limiter, you can set it with cipher as well as with osiris standard.
just download the manual and read it out.
about the rev limiter, you can set it with cipher as well as with osiris standard.
just download the manual and read it out.
Thanks for an advice.
#56
to do a whole new map, you'll need the Tuner. otherwise, Standard is ment for e-tunes/refined maps from Uprev. Cipher on the other hand can do as little:
Below is a short list of available data parameters...
- Target Idle RPM
- +/- 2 degree static timing adjustment
- Cylinder power testing
- Clear Learned Fuel settings
- Manual control of BCM functions, ie. Windows UP/Down, Activate Locks, Wipers, Lamps, etc.
- Fuel Pressure purge
- Ethanol Adjustments (if vehicle is equipped)
- Coolant Test
Below is a short list of available data parameters...
- Engine Speed - RPM
- Throttle Position Sensor
- Vehicle Speed
- MAF Sensor
- Calculated Load Value
- Oxygen Sensor
- Ignition Timing
- Accelerator Position
- Wide Band A/F Voltage (equipped vehicles)
- Coolant Temperature
#60
350Z-holic
iTrader: (25)
for real???
u can't even adjust the limiter with osiris standard?
u can't even adjust the limiter with osiris standard?