Custom Engine Grounding/Earthing Kit
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
I"M BAAAAACK!
Things have finally slowed down some - just enough for me to get back to the forums. I miss this place! I still can't believe this thread has grown to the size it is.
GHS ~ InSaNeAmine
Things have finally slowed down some - just enough for me to get back to the forums. I miss this place! I still can't believe this thread has grown to the size it is.
GHS ~ InSaNeAmine
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
Hello everyone!
Got a few give-aways for you:
1. Up for grabs is a brand spanking new 5 wire light purple grounding kit that has been sitting on my floor for several months and I want it to leave.
2. Next; an 8 wire SOLID RED grounding kit (used by me). I decided to go back to the clear red “candy cane” look.
3. Last but, not least – since I did the Borla give-away already; I wanted to offer something else up.
Any and all purchases from the beginning of the year until FATHER’S DAY will be entered into a drawing to receive their choice of CAIs – Injen or AEM!!!
Thanks for another wonderful year – I love you guys, thank you, thank you, thank you!
THE FIRST EMAILS CLAIM THE GK’S:
InSaNeAmine@***.net
Got a few give-aways for you:
1. Up for grabs is a brand spanking new 5 wire light purple grounding kit that has been sitting on my floor for several months and I want it to leave.
2. Next; an 8 wire SOLID RED grounding kit (used by me). I decided to go back to the clear red “candy cane” look.
3. Last but, not least – since I did the Borla give-away already; I wanted to offer something else up.
Any and all purchases from the beginning of the year until FATHER’S DAY will be entered into a drawing to receive their choice of CAIs – Injen or AEM!!!
Thanks for another wonderful year – I love you guys, thank you, thank you, thank you!
THE FIRST EMAILS CLAIM THE GK’S:
InSaNeAmine@***.net
Got my grounding kit last week and installed it in 40 minutes. Red 5 wire kit looks great under my hood. Thanks for the great looking kit. Instructions could not have been any better. Great product Insaneamine!!!
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
From TDC clockwise:
Orange - Sunset
Clear Silver
Matte Solid Silver
Clear Smoked
Solid Black
Clear Redline
Solid Red - Laser
Solid Yellow
Light Clear Purple
Dark Clear Purple
Light Clear Blue - Caribbean
Medium Clear Blue - Daytona
Dark Clear Blue - Twilight
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
Hey everyone!
I just wanted to thank everybody for their interest on the grounding kits and to remind you all that you have less than a month to get in on the CAI giveaway.
As always, I am grateful for your business and appreciative of your support!
I just wanted to thank everybody for their interest on the grounding kits and to remind you all that you have less than a month to get in on the CAI giveaway.
As always, I am grateful for your business and appreciative of your support!
Damn this thread is long!!! But I just got my kit
Did you guys really use loctite as the instructions suggest? Will the bolts really come loose if I don't? Hope to get the thing installed this weekend. Thanks all! Looks like a great kit!
Did you guys really use loctite as the instructions suggest? Will the bolts really come loose if I don't? Hope to get the thing installed this weekend. Thanks all! Looks like a great kit!
Just got mine from him via Fed-Ex. He shipped them fast and no problems what so ever. I will install them and post pics soon. Thanks for the quality service Szita. I highly recommend this kit to anyone....Ed Mendez..
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
I have had several requests about the compatibility of the Kinetix plenum and the grounding kit.
There are NO incompatibilities provided you make a couple of adjustments to the connection points.
All that needs to be done is adopt the G35 connections at the rear of the plenum closest to the firewall. The rest stays the same.
On the driver side:
Remove the long 10 mm bolt in the bend of the plenum just left of the throttle body. Attach the #5 (32") wire to this bolt and re-secure.
Note: Even though the terminal is sitting on the plastic plenum, the bolt still attaches to metal.
On the passenger side:
At the rear on the motor, you will see a bracket/module assembly held on with a 10mm bolt. Remove that bolt while holding on to the assembly so it doesn’t fall. Place the #4 (30") wire terminal on top of the bracket/module assembly from and re-secure using the existing 10m bolt and washer.
In the picture, notice the red squares are the old attachments.
And while I have your attention – I want to thank everyone AGAIN for all of your support. You are making this another stellar year.
Enjoy.
There are NO incompatibilities provided you make a couple of adjustments to the connection points.
All that needs to be done is adopt the G35 connections at the rear of the plenum closest to the firewall. The rest stays the same.
On the driver side:
Remove the long 10 mm bolt in the bend of the plenum just left of the throttle body. Attach the #5 (32") wire to this bolt and re-secure.
Note: Even though the terminal is sitting on the plastic plenum, the bolt still attaches to metal.
On the passenger side:
At the rear on the motor, you will see a bracket/module assembly held on with a 10mm bolt. Remove that bolt while holding on to the assembly so it doesn’t fall. Place the #4 (30") wire terminal on top of the bracket/module assembly from and re-secure using the existing 10m bolt and washer.
In the picture, notice the red squares are the old attachments.
And while I have your attention – I want to thank everyone AGAIN for all of your support. You are making this another stellar year.
Enjoy.
Thread Starter
Inventor
Z-Xtreme.com
Z-Xtreme.com
iTrader: (1)
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
I have been so busy cutting wire I haven’t had time to make this post but here I am.
It’s not too late! You can still get yourself or your favorite Kris Kringle an infamous InSaNeAmine ~ Custom Engine Grounding Kit!
Your choice: Clear Red, Clear Silver, Clear Daytona Blue, Solid Yellow, Solid Matte Silver, and of course Clear Purple and Clear SMOKED!
Here is the Holiday Special:
From now till the end of the year I’ll be offering my commercial pricing:
5 Wire Set: $68 shipped
6 Wire Set: $73 shipped
7 Wire Set: $78 shipped
I am only making this order to forum members! You save almost $20.
EMAIL ME DIRECTLY FOR OFFER.
Thanks again for everyone’s support. Happy Holidays!
InSaNeAmine.
It’s not too late! You can still get yourself or your favorite Kris Kringle an infamous InSaNeAmine ~ Custom Engine Grounding Kit!
Your choice: Clear Red, Clear Silver, Clear Daytona Blue, Solid Yellow, Solid Matte Silver, and of course Clear Purple and Clear SMOKED!
Here is the Holiday Special:
From now till the end of the year I’ll be offering my commercial pricing:
5 Wire Set: $68 shipped
6 Wire Set: $73 shipped
7 Wire Set: $78 shipped
I am only making this order to forum members! You save almost $20.
EMAIL ME DIRECTLY FOR OFFER.
Thanks again for everyone’s support. Happy Holidays!
InSaNeAmine.



