When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im not real sure yet how we are doing it...but ill find ot tomorrow when the car is moving and i talk to Tony how all that is going down
and thanks Breww HA HA for the thought...the polish was free so im cool with it lol...Tony is going to touch up on it as well and get it the best he can (like on the TRC lable)
Maybe I missed it. But what are you using to do your Tune?
Were you also able to get your gauges functioning as well. We are about to finish up the testing on our LSX harnesses incorporating the stock gauges and should be able to adapt our 2jz harnesses to do the same.
Maybe I missed it. But what are you using to do your Tune?
just the APEXI SAFC II for right now (to get it running) but i am looking at the Mega sqirt for beginning of summer...not alot of people use it but i havnt heard a bad thing from those who do
Originally Posted by Brew_haha
Were you also able to get your gauges functioning as well. We are about to finish up the testing on our LSX harnesses incorporating the stock gauges and should be able to adapt our 2jz harnesses to do the same.
Tony hasnt worked on that yet from what i understand, wanted to wait till the car was moving first
travis i am also local to that supra trans, if supraturboman cannot check it out, i can always give it a look.
awesome! Tony said he has been in contact with the owner and he is trying to see if the guy will ship it as of now...but if the guy wont ship, he may need to find someone who might help hm out with it
Question for Travis... Is your 2jz have a front or rear facing oil pan? Is there any clearance issues associated with either oil pan while using the swap kit?
Last edited by BornSlippyZ; 02-21-2012 at 07:23 AM.
Question for Travis... Is your 2jz have a front or rear facing oil pan? Is there any clearance issues associated with either oil pan while using the swap kit?
i am using the front sump...it has no issues and sits higher than the VQ's pan did....as for the rear sump, it will not fit due to the crossmember...
Tony did say he has a front sump for sale if anyone doing the swap needs one!
Last edited by travismaser; 02-21-2012 at 07:24 PM.
02-15-2012, 08:57 AM
i think tony ordered both of ours at the same time. 
