LS Hot Cam (P/N 88958733) .525" intake and exhaust valve lift. Duration (@ .050") is 219° intake and 228° exhaust

http://www.crateenginedepot.com/LS37...10724C943.aspx

 

I will be racing at Road Atlanta in Braselton GA on 6/16/20102 - 6/17/2012 if you want to see the car close up. NASA events at Road Atlanta are a really good way to see lots of cool race/show cars. You can wander through the pits and the entire track like you own the place.

http://www.roadatlanta.com/directions.lasso

 

Just read your build. Nice work. I am about to acquire a 350z and was wondering what the weight change was by installing the LS engine. I've done quite a few LS swaps into Porsches and even the entire Z06 drive train into a couple 928's to get 49/51 weight distro front to back. From your pics it looks like the torque tube and Vette trans will fit the Z as well.
Do the outboard stub shafts accept 930 cv's or are the axle shafts 28 spline?

 

You racing any time in the near future? I'd like to come check the car out as well!

Thanks

 

Hey I'm doing a ls3 now in my 350z and I want to ask how u did your wiring I would appreciate whut ever tips u can hoop me if

 

where did you strap the chain to hoist the engine off?

 

I need help with the wiring can sum one help me thinks

 

was that english?

 

Cpt Morgan version.