Customer's 350z LS3 Swap
#1
Vendor - Former Vendor
Thread Starter
Customer's 350z LS3 Swap
Starting the New Year off right with an LS3 swap!
Just started on this build yesterday and it's going to be a good one. Make sure to keep checking back for updates. Lots of pictures to come.
Final shots of everything all buttoned up.
StopTech and a nice set of Volk's. Who needs the stickers on a track car?
Undercarriage with a dual Greddy setup.
Quick interior shot. Post build a proper cage will be fabricated.
Weighing in on the scales. Didn't gain too much over the holiday season
Just started on this build yesterday and it's going to be a good one. Make sure to keep checking back for updates. Lots of pictures to come.
Final shots of everything all buttoned up.
StopTech and a nice set of Volk's. Who needs the stickers on a track car?
Undercarriage with a dual Greddy setup.
Quick interior shot. Post build a proper cage will be fabricated.
Weighing in on the scales. Didn't gain too much over the holiday season
#4
Vendor - Former Vendor
Thread Starter
Trending Topics
#9
Vendor - Former Vendor
Thread Starter
Loaded weight is around 3,800 pounds and besides having the dash most of the interior is gutted out. Brakes are bigger, but still light and of course lightweight wheels. Cage is going to add a good bit of weight back into it as well.
#10
Vendor - Former Vendor
Thread Starter
Some more progress today. I watched John pull this out and it was smooth as butter.
Everything disconnected.
And there she goes.
Soon to be filled with a very nice motor setup.
Everything disconnected.
And there she goes.
Soon to be filled with a very nice motor setup.
#16
Vendor - Former Vendor
Thread Starter
Flipped to install the pan and mounts from SIKKY.
Swapping on an awesome Wilwood/SIKKY combo and you can see the difference compared to the stock setup.
Waiting on a few more parts right now, but the build so far is going very well.
Swapping on an awesome Wilwood/SIKKY combo and you can see the difference compared to the stock setup.
Waiting on a few more parts right now, but the build so far is going very well.
#20
Vendor - Former Vendor
Thread Starter