Notices
Engine & Drivetrain VQ Power and Delivery

Need help with certain codes and VDC & slip lights!!!! HELPPP

Thread Tools
 
Search this Thread
 
Old Mar 18, 2014 | 05:31 PM
  #1  
Sajizzlybear's Avatar
Sajizzlybear
Thread Starter
Registered User
 
Joined: Jan 2012
Posts: 11
Likes: 0
From: Old Bridge nj
Default Need help with certain codes and VDC & slip lights!!!! HELPPP

So.. before you guys flame me.. yes i checked the forum, and no its not solving my problems no matter what i try.

Codes:
P0159-Rear O2S, Bank 2
P1166-Heated O2 Sensor 2
P1147-Heated O2 Sensor 2
P1167-Heated O2 Sensor 2

Story:
got Megan testpipes. check engine light. got o2 spacers. still throwing codes. tried all combinations. even tried the one CEL delete that was posted on here. Once i got the o2 spacers in.. my car decided to throw even MORE codes. and i dont know how to get rid of them.. should i get new o2 sensors as a whole? or should i try a certain combination of o2 spacers? i have the elbow ones from ebay.


VDC & Slip lights:
Yes i searched for it, and yes i got my answer. I swapped out the camshaft position sensors and it fixed my issue. But now they only come on whenever i hit a hard bump. JUST a hard bump. then i searched for it again.. they say low brake fluid.. so i topped it off and it STILL comes on. then i searched once again, they say low brake pads. but i upgraded my brakes to the akebono 370z brakes and my brake pads virtually have maybe 3k miles on them. so that cant be it either.

Any help would be greatly appreciated.. tried almost everything and cant figure it out. i searched this forum page for answers and tried every method there was listed here.

i put pictures down below to show you codes


Name:  Screenshot_2014-03-13-19-24-55.png
Views: 101
Size:  293.7 KB
Reply
Old Mar 19, 2014 | 07:35 AM
  #2  
Sajizzlybear's Avatar
Sajizzlybear
Thread Starter
Registered User
 
Joined: Jan 2012
Posts: 11
Likes: 0
From: Old Bridge nj
Default

no one has an answer for me?! ((
Reply
Old May 21, 2014 | 06:37 PM
  #3  
Bigsyke's Avatar
Bigsyke
Registered User
 
Joined: Aug 2013
Posts: 134
Likes: 1
From: Mid West
Default

I'm in the same boat. I'm getting the P1147 now (used to get p0430). Megan test pipes with 2x o2 spacers.

The 1147 is what I'm curious about. Right before it came on, I hit the throttle hard and it hesitated slightly. After the power seemed to be down and the exhaust was rattling much more than usual.

Do any rear o2 codes like this (P1147) affect engine operation?
Reply
Old May 27, 2014 | 08:38 PM
  #4  
shiftdrift06's Avatar
shiftdrift06
New Member
iTrader: (24)
 
Joined: Nov 2007
Posts: 490
Likes: 1
From: Htown
Default

Normally, the rear o2 sensors only monitors if you have cat converter.

But, I had one of the rear ones short out for some reason and it effected my drive-ability. With my scan tool, the voltage on that one bad was way out of range. I think it shorting out affected the voltage of ecu or other o2 sensors?? My car would hesitate pretty bad.

I bought another rear sensor used one from the junkyard, now its fine lol.

Last edited by shiftdrift06; May 27, 2014 at 08:39 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
loudtoyz
Engine & Drivetrain
8
Apr 6, 2023 04:52 AM
Uriyo_
Exterior & Interior
22
Sep 8, 2021 08:46 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM
Detailed Image
Cleaning & Detailing
0
Sep 28, 2015 03:03 AM




All times are GMT -8. The time now is 09:47 AM.