Stock intake modification. VQ35DE +32 hp
#43
Registered User
[QUOTE=l2frankie;10500065]
I don't agree with cutting the posts out. I don't think those are really any type of restriction and I don't want to take away any clamping force and structural support. Only thing he could have really gutted is the lower manifold but I haven't seen those pictures.
Unless I'm missing something he chopped off the stock neck and grafted some aluminum pieces on it to make a larger opening and then welded some 3.5" pipe to it and built the rest of the intake. It couldn't be reproduced in an hour but a solid day or two and it could be.
the inside was also gutted out. very interested in looking for a shop to try and replicate this. maybe say its for the z community
the inside was also gutted out. very interested in looking for a shop to try and replicate this. maybe say its for the z community
#44
Registered User
Join Date: Apr 2015
Location: Raleigh, N.C.
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
This is why I am offering two version of what 2TH PWR has.
Option 1 ; that has a reducer from 3.5'' down to a 75mm flange for the OEM or Maxima09+ TB
or
Option 2 ; No TB flange welded for you to decided on your end of which kind of TB / flange you want to go.
Price range is less than 1000$
Option 1 ; that has a reducer from 3.5'' down to a 75mm flange for the OEM or Maxima09+ TB
or
Option 2 ; No TB flange welded for you to decided on your end of which kind of TB / flange you want to go.
Price range is less than 1000$
SOOOOOO any information on the manifold's development??? I.e. Pricing on a complete kit (Intake, MAF, tb, and piping), and pricing on simply a manifold.
P.M. if necessary
V/r
Jerell
Last edited by A.I.M.; 04-17-2015 at 01:18 PM. Reason: adding information
#46
This is a bit out of date now.
I had never planned to produce these plenums myself. The cost would be a bit high for the 350Z crowd. And then there are always the fabricators that would just take a look at the design and make something extremely similar themselves. So the profit would be not worth my time.
I do have another plenum however and my fabricator has a couple of things he would like to try. I have a build thread on this site. youtube is probably going to become the easiest way to follow me.
I had never planned to produce these plenums myself. The cost would be a bit high for the 350Z crowd. And then there are always the fabricators that would just take a look at the design and make something extremely similar themselves. So the profit would be not worth my time.
I do have another plenum however and my fabricator has a couple of things he would like to try. I have a build thread on this site. youtube is probably going to become the easiest way to follow me.
Thread
Thread Starter
Forum
Replies
Last Post