Quick crankshaft sensor question
#1
New Member
Thread Starter
Quick crankshaft sensor question
*I know this has been over done but i cant find anything on this specific issue*
2003 Touring Z 6MT
Couple months ago i replaced both camshaft sensors because of the common problem with the VQ35DE blah blah blah.
I bought OEM camshaft sensors and for some wild reason i bought the Autozone CRANKshaft sensor. Shortly after installing these 3 i noticed that when my car is fully warm and i rev it it will come down to about 200-300 RPM's and the entire car will shake for about 1-2 seconds then go back to normal idle. Seems like a vacuum leak or misfire but i recently did brand new plugs (They were due anyway) and checked all vacuum lines everything is in tip top shape but im just having this issue. It also happens when im rolling up to a stoplight and put the car into neutral.
Could it be the Cheapo crankshaft sensor?
*EDIT* Yes ive tried the idle relearn/All reset methods.
2003 Touring Z 6MT
Couple months ago i replaced both camshaft sensors because of the common problem with the VQ35DE blah blah blah.
I bought OEM camshaft sensors and for some wild reason i bought the Autozone CRANKshaft sensor. Shortly after installing these 3 i noticed that when my car is fully warm and i rev it it will come down to about 200-300 RPM's and the entire car will shake for about 1-2 seconds then go back to normal idle. Seems like a vacuum leak or misfire but i recently did brand new plugs (They were due anyway) and checked all vacuum lines everything is in tip top shape but im just having this issue. It also happens when im rolling up to a stoplight and put the car into neutral.
Could it be the Cheapo crankshaft sensor?
*EDIT* Yes ive tried the idle relearn/All reset methods.
Last edited by carder24; 11-18-2019 at 11:30 AM.
#4
New Member
Thread Starter
So its still doing it , Oh well it was worth a shot. I got the codes pulled and i think if i can remember from last night it was a fuel tempature code?
Thread
Thread Starter
Forum
Replies
Last Post
phreaktor
Maintenance & Repair
17
07-21-2019 08:03 AM
blazin202
Maintenance & Repair
1
06-25-2014 04:09 PM