Notices
Engine & Drivetrain VQ Power and Delivery

350z not starting

Thread Tools
 
Search this Thread
 
Old Jul 27, 2022 | 01:59 PM
  #1  
AwpV1's Avatar
AwpV1
Thread Starter
Registered User
 
Joined: Jul 2022
Posts: 1
Likes: 0
From: Cqnada
Default 350z not starting

Hey was looking to get some help on my 2002 350z it currently has 100,000km. A few months ago From time to time I would have trouble starting the car, it would crank but not start and sometimes when it would start you would hear a mini growl from the car and then instantly die. I replaced the crankshaft sensor and it got better for a few months but recently the same issue has been occurring where the car would start but then instantly die and then take a few tries to start again. Anybody have any clue what the problem could be.
I’m thinking it’s the fuel pump just need a second opinion
Note: I replaced the battery March this year
Thanks in advance
Reply
Old Jul 28, 2022 | 03:10 AM
  #2  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,722
Likes: 9,296
From: Texas
Default

my guess would be cam shaft sensors
Reply
Old Jul 28, 2022 | 06:43 PM
  #3  
MyZ4U2C's Avatar
MyZ4U2C
New Member
 
Joined: Oct 2003
Posts: 838
Likes: 6
From: Raleigh, NC
Default

My 2003 was doing the exact same thing you describe. I took it in a couple weeks ago as it left me stranded at a stoplight but luckily fired back up. Anyway the bank 1 camshaft sensor was shot and i elected to replace bank 1 and 2 camshaft sensors and the crankshaft sensor as well and it runs better than ever. If you need to replace any one of these 3, then you should replace all 3 and with OEM/Hitachi sensors nothing else.
Reply
Old Sep 30, 2022 | 09:22 AM
  #4  
kenny0469's Avatar
kenny0469
New Member
 
Joined: Sep 2022
Posts: 2
Likes: 0
From: rhode island
Default

im having the same issue i have seen you on a couple other post so i wanted to ask im having a problem starting my 04 convert Z it cranks but wont start replaced my cams it started right up then right after driving i turned it off tried to start again and it wouldnt start i have codes for 02 and my evaps clogged just bought another putting it in soon what do you think the problem could be
Reply
Old Sep 30, 2022 | 09:37 AM
  #5  
MyZ4U2C's Avatar
MyZ4U2C
New Member
 
Joined: Oct 2003
Posts: 838
Likes: 6
From: Raleigh, NC
Default

Originally Posted by kenny0469
im having the same issue i have seen you on a couple other post so i wanted to ask im having a problem starting my 04 convert Z it cranks but wont start replaced my cams it started right up then right after driving i turned it off tried to start again and it wouldnt start i have codes for 02 and my evaps clogged just bought another putting it in soon what do you think the problem could be
Did you only replace the cam sensors? If so, try replacing the crankshaft position sensor as well. The O2 and evap may cause it run a little poorly but i wouldnt think it would prevent from starting. Try the CPS.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Myzteke
Maintenance & Repair
6
Jun 8, 2017 02:45 PM
dj_saki
Maintenance & Repair
10
Jul 11, 2013 03:15 PM
solidfish
Maintenance & Repair
3
Apr 1, 2010 03:11 PM
Stailey
Maintenance & Repair
3
Oct 29, 2008 03:55 PM
stereoneeds
Maintenance & Repair
12
Oct 10, 2008 06:53 PM




All times are GMT -8. The time now is 08:55 AM.