Does anybody know how much a good shop would charge to install a Greddy TT with intercooler?

 

I was quoted $2K to install including dynos and complete tuning.

 

thats not a bad deal btw expect anywhere between 1500-3000 for install and tuning. best deal ive seen is 350zforums.org in fort worth they have a special for 1500 installed and tuned.

 

$1500 for installation of the kit. Guages, electronics, and everything else would be extra.

 

$1000 for me since it was the first time they worked on a Z.

 

Thanks a lot, i will keep those prices in mind

 

if your good with tools do it yourself. its not hard. the only part thats difficult is the electrical which you could let a shop do. could save you half the cost if you installed the manifolds, turbos and ic yourself along with the injectors, etc. then let the shop do the emanage and tune

 

What, in addition to the GReddy FMIC and a set of colder range sparkplugs, is needed in addition to the GReddy TT kit to "do it right"?

Like what other parts should be added to improve reliability or increase safety? The kit doesn't come with any gauges, so clearly gauges are another thing needed. What else?


So far we have:

GReddy TT kit = ~$6500
GReddy (or other?) FMIC = $???
Sparkplugs = $??
Gauges = ~$800 for decent boost, EGT, and fuel pressure guages (is that a decent estimate?)
Labor = ~$2000

As you can see it's really a $10k job and that's not including unncessary but good additions such as upgraded brakes, suspension, wheels, and tires.

 

Oops, looks more like $6k for TT kit not $6.5k.

 

no you can get the kit with ic for about 6k now, dont forget tuning and a clutch and flywheel which you will definitely need! its not cheap to do it right but it can be done cheaper than what some ppl do it for if you know what i mean

 

Just had a guy in Dallas quote us about $900.