Exedy Hyper Carbon Clutch Package with Flywheel
05-20-2004, 02:13 PM
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: NOR*CAL
Posts: 1,407
Likes: 0
Received 0 Likes
on
0 Posts
Exedy Hyper Carbon Clutch Package with Flywheel
Does anyone have the Exedy clutch/flywheel package? How does it compare to the other clutches and flywheels available for the Z?
Thanks
Thanks
12-14-2004, 01:33 AM
#2
Registered User
Join Date: Dec 2004
Location: Honolulu
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Howzit LouZer, did anyone reply to your post? Did you get the Exedy Hyper Carbon clutch/flywheel package? How is it working for you? I'm interested in that very package. Please let me know! Thanks!
Last edited by wzntme; 12-14-2004 at 01:35 AM.
12-15-2004, 06:20 AM
#6
Sponsor
Forged Internals.com
Forged Internals.com
http://hopupracing.com/exhysiplclni.html
http://www.i-m-racing.com/exhysiplcl35.html
http://bulletproofautomotive.com/cat...il.php?ID=2163
http://www.clutchcityonline.com/nissan_racing_350z.htm
http://www.gruppe-s.com/350z/ztrn.htm
I think there are a few other places that sell them as well.
http://www.i-m-racing.com/exhysiplcl35.html
http://bulletproofautomotive.com/cat...il.php?ID=2163
http://www.clutchcityonline.com/nissan_racing_350z.htm
http://www.gruppe-s.com/350z/ztrn.htm
I think there are a few other places that sell them as well.
Trending Topics
12-31-2004, 05:06 AM
#10
Registered User
Join Date: Jul 2004
Location: Ohio
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Nissan350ZTT
I hear the Exedy should hold over 650hp. I don't know how much it weighs or how it drives.
I hear the Exedy should hold over 650hp. I don't know how much it weighs or how it drives.
Did anyone ever purchase the Exedy clutch/flywheel combo yet??? The very few comments I've heard on it have been good, but I was just curious as to some details. A guy I've ran into 2 or 3 times said he's got it(he said its rated at 750 HP and he dropped $1700.00 for his) just havent been able to drive his Z yet. Any updates would be greatly appreciated, thanks.
12-31-2004, 07:34 AM
#11
A bunch of us on F/I Board are going with the ATS twin disc carbon/carbon clutch/flywheel setup. It comes in two different pressure plate weights, and single, double, or triple carbon disc. THe double, which most of us opted for, is good for about 750trq. Stock engagement, and stock pedal pressure. Price is roughly $1950 shipped
https://my350z.com/forum/showthread....hreadid=104120
https://my350z.com/forum/showthread....hreadid=104120
12-31-2004, 03:36 PM
#12
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
the Exedy single sells for anywhere from 1600-1800...it holds a max of 400 hp. Good for NA cars
the twin is considerably more money, and a few people here have it as well
the twin is considerably more money, and a few people here have it as well
12-31-2004, 03:54 PM
#13
Sponsor
Forged Internals.com
Forged Internals.com
aalzuhair has the Exedy Twin-Disc Carbon Clutch and Flywheel, here's his review he replied to me in pm's a month or so ago:
"But anyway the Exedy twin carbon clutch its very smooth on engagement it does not jerky or come on too strong.
At first, the clutch pedal felt a bit harder than the stock clutch but not hard that it would be inconvenient for a daily driven car. The car does make a bit of a noise at idle and below 2000 rpm’s (some times) but once you have the car on the go it feels like stock. In heavy traffic its not harder than the stock clutch, I have not noticed any deference in driving comfort.
But I can tell you that with fast shifting the clutch do its best and this is where the money is. When I shift fast from the start the car engages some smooth that a lot of people told me that me shifting skills have gotten much better. I have received a few complements about how fast I shift without jerking the car, and I tell them it is all in the clutch.
So yes it was worth the money. I got the clutch from Ultimate Racing, which they got it from Adam at Z1 performance. They bought it for me because I asked them to get me the best clutch system available in the market for the 350z. I would rate Exedy clutch / flywheel combo at a 9 out off 10, just because I believe that nothing is perfect.
Q: How many Exedy clutches are available?
A: I think 3 are available. One plate, twin and 3 plates all carbon. But the one I have is the "Hyper Carbon Series, Semi Carbon Multi, Twin carbon clutch / flaywheel combo" it runs for about $2800 or so and that is the one your looking at and it will be the last clutch you will ever buy
Q: how much hp and tq is the Exedy supposed to hold up to?
A: Well on Z-1 Performance it says like 750hp (Idon't know if they mean wheel HP or flaywheel HP), but according to others, it can hold much more than that, however, Exedy under rates their clutch to be on the safe side."
"But anyway the Exedy twin carbon clutch its very smooth on engagement it does not jerky or come on too strong.
At first, the clutch pedal felt a bit harder than the stock clutch but not hard that it would be inconvenient for a daily driven car. The car does make a bit of a noise at idle and below 2000 rpm’s (some times) but once you have the car on the go it feels like stock. In heavy traffic its not harder than the stock clutch, I have not noticed any deference in driving comfort.
But I can tell you that with fast shifting the clutch do its best and this is where the money is. When I shift fast from the start the car engages some smooth that a lot of people told me that me shifting skills have gotten much better. I have received a few complements about how fast I shift without jerking the car, and I tell them it is all in the clutch.
So yes it was worth the money. I got the clutch from Ultimate Racing, which they got it from Adam at Z1 performance. They bought it for me because I asked them to get me the best clutch system available in the market for the 350z. I would rate Exedy clutch / flywheel combo at a 9 out off 10, just because I believe that nothing is perfect.
Q: How many Exedy clutches are available?
A: I think 3 are available. One plate, twin and 3 plates all carbon. But the one I have is the "Hyper Carbon Series, Semi Carbon Multi, Twin carbon clutch / flaywheel combo" it runs for about $2800 or so and that is the one your looking at and it will be the last clutch you will ever buy
Q: how much hp and tq is the Exedy supposed to hold up to?
A: Well on Z-1 Performance it says like 750hp (Idon't know if they mean wheel HP or flaywheel HP), but according to others, it can hold much more than that, however, Exedy under rates their clutch to be on the safe side."
12-31-2004, 05:59 PM
#14
Registered User
Join Date: Nov 2003
Location: Sydney, Australia
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Z1 Performance
the Exedy single sells for anywhere from 1600-1800...it holds a max of 400 hp. Good for NA cars
the twin is considerably more money, and a few people here have it as well
the Exedy single sells for anywhere from 1600-1800...it holds a max of 400 hp. Good for NA cars
the twin is considerably more money, and a few people here have it as well
01-01-2005, 05:50 AM
#15
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
