What is necessary to run VQ35 on an Engine Dyno ?
#1
Registered User
Thread Starter
What is necessary to run VQ35 on an Engine Dyno ?
Just as the question states.
I'm interested in running a VQ35 on an engine dyno, or in another car for that matter, using the stock ecu.
What all is required to make it run well?
Engine
Engine Harness
All four O2 sensors
Engine Computer
Immobilizer ?
Key ?
ABS computer ?
This is where I get confused at. I don't know how interlocking the 350Z ECU is with everything else that it has.
The throttle is electronic, so here goes, Would I need the gas pedal and gas pedal harness as well?
Stand alone is not an option on here, at least not one I want to take. I would rather reflash the ecu myself and figure out tuning on it. I've already done it for S13s and Z31s and also Z32s. It's time to get this VQ35 running and tuneable with the stock ecu.
Lastly, anybody got a wrecked or flooded 350z where I can find alot of this stuff ;-)
Thanks, Hope my first post isn't retarded.
Matt Vassallo
I'm interested in running a VQ35 on an engine dyno, or in another car for that matter, using the stock ecu.
What all is required to make it run well?
Engine
Engine Harness
All four O2 sensors
Engine Computer
Immobilizer ?
Key ?
ABS computer ?
This is where I get confused at. I don't know how interlocking the 350Z ECU is with everything else that it has.
The throttle is electronic, so here goes, Would I need the gas pedal and gas pedal harness as well?
Stand alone is not an option on here, at least not one I want to take. I would rather reflash the ecu myself and figure out tuning on it. I've already done it for S13s and Z31s and also Z32s. It's time to get this VQ35 running and tuneable with the stock ecu.
Lastly, anybody got a wrecked or flooded 350z where I can find alot of this stuff ;-)
Thanks, Hope my first post isn't retarded.
Matt Vassallo
Thread
Thread Starter
Forum
Replies
Last Post