Injected Performance Motor Package
#1
Thread Starter
Sponsor
Injected Performance
Injected Performance
iTrader: (15)
Joined: Jun 2004
Posts: 636
Likes: 0
From: Houston
Injected Performance Motor Package
Injected Performance is proud to release our street and race motor package for the Nissan 350z and G35 Non RevUp and RevUp VQ35DE. Pulling from our experience with high horsepower street and race applications we are now offering that same technology and engine building knowledge for customer’s looking to make high horsepower numbers or a replacement for a blown motor. We can build you a mild unsleeved replacement short block or a fully built stroker longblock package capable of holding over 1300rwhp.
Injected Performance currently holds the record for a street driven VQ35DE with over 1300rwhp. We have taken that knowledge and already built dozens of motors for customers driving cars on the street every day. If you are looking for a built motor please give us a call, PM, or email at greg@injectedperformance.com.
If you have any questions regarding shortblocks or longblocks please let us know. We can assemble and ship you a ready to go longblock or a built shortblock. Whatever you need we are able to accommodate. We have shipped our motors worldwide!!! We are now offering 4.15L High Compression Stroker Motors as well.
Short Block Stage 1: Good Stock Replacement Block for low to moderate Boost
Eagle Rods
CP Pistons
Injected Performance Spec Bearings
ARP Main Studs
Short Block Stage 2: Good Replacement for High Boost
BC Rods (Carrillo or Pauter Rods are also available depending on preference or HP goals)
CP Pistons
Darton MID Sleeves
ARP Main Studs
Injected Performance Spec Bearings
Short Block Stage 3: Same Shortblock used on our 1300rwhp Nissan 350z Drag Car and Wongy’s 718rwhp Daily Driven G35c Street Car
Brian Corwer 4.15L Stroker Crankshaft
CP Pistons
BC Rods (can be upgraded to Carrillo H Beam Rods)
Darton MID Sleeves
Injected Performance Billet Main Girdle
Injected Performance Spec Bearings
Cylinder Head Stage 1:
Upgraded Stock Size Valves
Upgraded Valve Springs
Titanium Retainers
Cylinder Head Stage 2: Same Shortblock used on our 1300rwhp Nissan 350z Drag Car and Wongy’s 718rwhp Daily Driven G35c Street Car
Injected Performance Port and Polish
5 Angle Valve Job
+1mm Intake and Exhaust Valves
Upgraded Valve Springs
Titanium Retainers
Also available is the Cosworth Big Valve Cylinder Head
Injected Performance currently holds the record for a street driven VQ35DE with over 1300rwhp. We have taken that knowledge and already built dozens of motors for customers driving cars on the street every day. If you are looking for a built motor please give us a call, PM, or email at greg@injectedperformance.com.
If you have any questions regarding shortblocks or longblocks please let us know. We can assemble and ship you a ready to go longblock or a built shortblock. Whatever you need we are able to accommodate. We have shipped our motors worldwide!!! We are now offering 4.15L High Compression Stroker Motors as well.
Short Block Stage 1: Good Stock Replacement Block for low to moderate Boost
Eagle Rods
CP Pistons
Injected Performance Spec Bearings
ARP Main Studs
Short Block Stage 2: Good Replacement for High Boost
BC Rods (Carrillo or Pauter Rods are also available depending on preference or HP goals)
CP Pistons
Darton MID Sleeves
ARP Main Studs
Injected Performance Spec Bearings
Short Block Stage 3: Same Shortblock used on our 1300rwhp Nissan 350z Drag Car and Wongy’s 718rwhp Daily Driven G35c Street Car
Brian Corwer 4.15L Stroker Crankshaft
CP Pistons
BC Rods (can be upgraded to Carrillo H Beam Rods)
Darton MID Sleeves
Injected Performance Billet Main Girdle
Injected Performance Spec Bearings
Cylinder Head Stage 1:
Upgraded Stock Size Valves
Upgraded Valve Springs
Titanium Retainers
Cylinder Head Stage 2: Same Shortblock used on our 1300rwhp Nissan 350z Drag Car and Wongy’s 718rwhp Daily Driven G35c Street Car
Injected Performance Port and Polish
5 Angle Valve Job
+1mm Intake and Exhaust Valves
Upgraded Valve Springs
Titanium Retainers
Also available is the Cosworth Big Valve Cylinder Head
Last edited by InjectedPerf; 07-03-2008 at 01:59 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post