SOLD!!

Motor parts list
Eagle H rods
WISECO 8.8 Pistons
ACL race bearing rod, main and thrust
ARP head studs
Cometic Head Gasket
Rev up oil pump
Port and polish heads by G&G
TOMEI 264 cams with 10.5 lift
Unorthodox Racing aluminum crank pulley

 

BUMP!

 

What's the mileage on it?

 

It has just a little over 50 miles on it.

 

is there anything you're looking for for a possible partial trade?

 

50 miles? So no leaked etc??? Everything good w it? What was this in? The 05 w the greddy tt or what ? And why selling ?

 

Only if you have anything for a EVO X .

 

how many hp is this engine capable of?

 

+1. I would also like to see the answers to these questions. As well, do you have receipts, etc. that confirms what's in/done to the motor? I'm in LA so I'm interested in picking this up.

 

The motor has no leaks, nothing is wrong with it, just bolt on your accessories drop it in and ready for boost. This was in the 05 Z with the TT kit. I’m selling because I am done with the Z platform. I had 2 turbo kits on my car. First I had a TURBONETICS kit on meth in it making OK power and the tranny was holding for a while with an upgraded stall and valve body but then the tranny started to go out and the TT kit took the tranny all the way out. The other reason is I was not happy with the way my car came back from the shop that installed the kit. Little things this and that, that I found out made me just not want it anymore. The motor was NOT built at that shop though. The motor was built at my friends shop.

 

Your only a few hours away. You could come up and check it out for your self. I don't have the receipts anymore, they have been long gone but I can open the motor and let you see for your self. My old stock motor was sold to a guy in your area.

 

I would only try for 500 -600, for anything over that you should have a sleeved block. I know guys running with 5++ WHP without a sleeved block.

 

is this a rev up motor? Willing to ship to the east coast?

 

No this is not a rev up motor. If you pay the shipping, I'll ship it.

 

Bump!!

 

Pic's of port work, cometic head gasket and cams. I tried to clean the exhaust side but I was out of carb cleaner.
If you look you can see that the heads have been removed from the block before. That’s for the ones who think the motor is still stock because I don’t have my receipts anymore.

 

omfg, one day i will have you... one day.

 

Good deal bump!!!

 

This is an OBO deal. I will also trade for good condition name brand set of 18s, or 19s 5 x114 wheels plus cash. Come on guys need this thing gone.

 

Bump to the top....