FS: Port & Polished Heads, Supertech, Cosworth
10-09-2012, 09:16 PM
#1
Registered User
Thread Starter
Join Date: Nov 2011
Location: Cali
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Port & Polished Heads, Supertech, Cosworth
SOLD
Item #1: VQ35DE (non rev-up) Port and Polished Heads with +1mm Supertech Valves, Springs, Retainers.
Item #2: Cosworth ZK2 cams.
Item #3: Set of Six 600cc Siemens injectors (supplied with APS Extreme Fuel Kit)
I'm not active on my350z but I have an active thread over on g35driver:
http://g35driver.com/forums/forced-i...rbo-build.html
I purchased silver g's entire long block which included DE (non rev-up) heads. They are in perfect condition and silver g put less than 7,000 miles on them. My car is a 2007 rev-up and I used my heads for my turbo build.
Here is silver g's build with photos:
http://g35driver.com/forums/forced-induction/291836-aps-extreme-twin-turbo-build-has-begun-lots-pics-56k.html
Ok on to the goodies!
Heads with Valves, Springs & Retainers: SOLD
Cosworth Cams: SOLD
Set of Six APS Extreme 600cc Siemens injectors: SOLD
These heads flow great - check out the CFM #s in the photos below!!! I live in the central valley in CA if you are interested in picking up items. If not I'm happy to ship items as long as BUYER pays for all shipping costs. Please do not ask for heads to be parted out. They are being sold as listed above. Thanks! :biggthumpup:
Item #1: VQ35DE (non rev-up) Port and Polished Heads with +1mm Supertech Valves, Springs, Retainers.
Item #2: Cosworth ZK2 cams.
Item #3: Set of Six 600cc Siemens injectors (supplied with APS Extreme Fuel Kit)
I'm not active on my350z but I have an active thread over on g35driver:
http://g35driver.com/forums/forced-i...rbo-build.html
I purchased silver g's entire long block which included DE (non rev-up) heads. They are in perfect condition and silver g put less than 7,000 miles on them. My car is a 2007 rev-up and I used my heads for my turbo build.
Here is silver g's build with photos:
http://g35driver.com/forums/forced-induction/291836-aps-extreme-twin-turbo-build-has-begun-lots-pics-56k.html
Ok on to the goodies!
Heads with Valves, Springs & Retainers: SOLD
- Ported and polished by Port Flow
- Multi angle valve job by Port Flow
- +1 MM Supertech Oversized Valves (Inconnel Exhaust Valves and
Stainless Steel Intake Valves). - Supertech Titanium retainers
- Supertech Dual Valve Springs
Cosworth Cams: SOLD
- ZK2 270 degree cams
Set of Six APS Extreme 600cc Siemens injectors: SOLD
- Flow matched prior to install
- Used for less than 4,500 miles before upgrading
These heads flow great - check out the CFM #s in the photos below!!! I live in the central valley in CA if you are interested in picking up items. If not I'm happy to ship items as long as BUYER pays for all shipping costs. Please do not ask for heads to be parted out. They are being sold as listed above. Thanks! :biggthumpup:
Last edited by o__O; 12-28-2012 at 11:19 AM. Reason: Items sold
10-20-2012, 03:22 PM
#5
Registered User
Thread Starter
Join Date: Nov 2011
Location: Cali
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
12-21-2012, 11:17 AM
#10
Registered User
Thread Starter
Join Date: Nov 2011
Location: Cali
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Althogh the Cosworth spec sheet says "rev up" these are NOT rev up cams. This is a mistake on the part of Cosworth. The exhaust cams are not indexed for variable timing. The part # listed 20002508 is the correct part # for DE (non-revup) cams.
12-21-2012, 11:19 AM
#11
Registered User
Thread Starter
Join Date: Nov 2011
Location: Cali
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
