FS: NA Built Race Motor, VQ35
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2012
Location: Menlo Park
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm selling a built, normally aspirated race motor. VQ35 with all the accessories- PS pump, alternator, waterpump, belt, fuel injectors, intake plenum, throttle body, water pipes, etc.
This was overbored, has high compression CP pistons, high lift-long duration Wolf cams, Carrillo rods, Ferrea valves, blueprinted and balanced. It has about 20 hours on it. Never over-reved.
The cover is wire cut to allow easy adjustment of the cams.
Fuel rail has been modified for AN fittings in the rear, and a loop around the front to equalize fuel pressure to all injectors. Fuel rail has been covered in gold, along with the air intake to reduce the heat the air and fuel see.
PM me if interested.
Asking $4,000 OBO. Local pick up, or will ship to lower 48 (not included in price!)
If you are NOT interested in buying it, but want to know how much HP it is making, its close to 950 HP. If you ARE interested in buying it, please PM me and I'll give you the real numbers. :-)
![](https://farm9.staticflickr.com/8263/8605923719_d9c0ed62f1_b.jpg)
![](https://farm9.staticflickr.com/8524/8607027330_bbcc86e2d8_b.jpg)
![](https://farm9.staticflickr.com/8244/8607026550_0132776a61_b.jpg)
This was overbored, has high compression CP pistons, high lift-long duration Wolf cams, Carrillo rods, Ferrea valves, blueprinted and balanced. It has about 20 hours on it. Never over-reved.
The cover is wire cut to allow easy adjustment of the cams.
Fuel rail has been modified for AN fittings in the rear, and a loop around the front to equalize fuel pressure to all injectors. Fuel rail has been covered in gold, along with the air intake to reduce the heat the air and fuel see.
PM me if interested.
Asking $4,000 OBO. Local pick up, or will ship to lower 48 (not included in price!)
If you are NOT interested in buying it, but want to know how much HP it is making, its close to 950 HP. If you ARE interested in buying it, please PM me and I'll give you the real numbers. :-)
![](https://farm9.staticflickr.com/8263/8605923719_d9c0ed62f1_b.jpg)
![](https://farm9.staticflickr.com/8524/8607027330_bbcc86e2d8_b.jpg)
![](https://farm9.staticflickr.com/8244/8607026550_0132776a61_b.jpg)
![](https://farm9.staticflickr.com/8111/8607026120_58741a9121_b.jpg)
#2
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2012
Location: Menlo Park
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm selling this motor because the person who bought the car is putting a V8 in it and didn't want the engines. It is used however, it's a good motor.
Open to offers!
Open to offers!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
balanced, build, built, compression, engine, externally, fully, high, internally, motor, na, race, sale, vq35, vq35de