When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi guys, I haven't been on this page for so long and I've been trying to sell my engine stuff on craigslist since I couldn't sign in on here lol. Anyway I sold the car a while back and sold everything except my Engine/block/heads etc. All parts have 1,500 miles on it, I spun rod bearings but there was no damage to the block or cylinder heads.
All parts are in properly working manner with low miles, have any questions just ask.
Performance internals are all forged rods and oversized pistons Arias brand with a Darton sleeved 100mm block. (3.8L)
I have everything for this motor so just PM me if you have questions.
OEM camshafts ( original 137k miles) $100
OEM camshaft caps (137k) $50
Cylinder heads with Ferrea valve stem seals and Brian Crower titanium valve springs and retainers.(heads 137k, retainers and springs 1,500k miles) $600
OEM front and rear timing covers (137k miles) 80$
Darton Sleeved 100mm block with 100mm Arias 9:1 compression pistons and eagle H beam rods bored to a 3.8L block. (1,500 miles) $2,500
OEM VVT solenoids $50
Valve covers $50
Ignitions coils $120
Camshaft exhaust and intake sprockets/gears $ 100
Water pump $20
Rev up oil pump $160
ARP L19 head studs $75
ARP girdle studs $75
Intake plenum upper and lower $250
Upper oil pan $ SOLD
Clutch $ SOLD
Uprev GT MAF $ SOLD
Turbonetics single turbo kit $ SOLD
DC headers $ SOLD
I have EVERYTHING for this motor for it to be running except rod bearings and crankshaft bearings so lmk what you need, the list above is just the main parts.
E-mail is the best way to contact me. (pick up is advised but shipping may be an option depending on what you need)
Sleeved VQ(de) block, 3.8L with 100mm pistons
