hand laid fiberglass... is that considered quality materialinthe bodykit buisness?

 

Ill be in for the rear bumber as soon as the shipping coast is figured out, that way i know what the total amount is.

 

Please add me to your list for the Front Bumper Lip... Thanks!

 

Also, im with Tight-Z about the shipping cost as well, but put me down for the Front, thanks again!!!!

 

take the list, cut & paste it into your reply & add yourself to the list. this way the list gets moved forward & everyone can see whos in & whos not. you can add your name now & always back out if things dont turn out the way you expected........

1) Cbrflyer919 - Rear Valence
2) myz8a4re - rear valence(possibly rear spoiler as well)
3) drifter23 - Rear Valence
4) n77nxc - Rear Valence - OK WITH PRICE
5) Anna- Possible whole kit, def. rear valence, spoiler and sides
5)Chris (LaidbackRacr) - Rear and Wing for sure...poss sides
6) Srivero297 - rear valence possibly (based on price)
7)
8 Blownaway - Rear valance and side skirts
9)DLin05 - Spoiler(time/price dependent)
10) tonywenzel - rear valence, shipping price dependent
11) KiddZ- whole kit (-wing)
12) buzzardmountain - rear valence (quality/fit???)
13)myinfinitig20- (rear bumper for sure) maybe side skirts
14)
15)

also cbrflyer919, did speed racing give a discounted price for the entire kit? i know some vendors sell individual pieces of a kit for more than the entire kit bought as a whole. a discounted "whole" kit may allow him to sell entire kits as opposed to just separate pieces. just curious, i thought some others may be as well!

-justin

 

1) Cbrflyer919 - Rear Valence
2) myz8a4re - rear valence(possibly rear spoiler as well)
3) drifter23 - Rear Valence
4) n77nxc - Rear Valence - OK WITH PRICE
5) Anna- Possible whole kit, def. rear valence, spoiler and sides
5)Chris (LaidbackRacr) - Rear and Wing for sure...poss sides
6) Srivero297 - rear valence possibly (based on price)
7)
8 Blownaway - Rear valance and side skirts
9)DLin05 - Spoiler(time/price dependent)
10) tonywenzel - rear valence, shipping price dependent
11) KiddZ- whole kit (-wing)
12) buzzardmountain - rear valence (quality/fit???)
13)myinfinitig20- (rear bumper for sure) maybe side skirts
14)sarcasm82- rear bumper (license plate fit??) and front lip
15)

 

its only an add on valence, not a rear bumper replacement. if you look at the pic you can see the line where the valence is added on to the existing bumper. so i can be adapted to any model z............

-justin

 

UMMMM, anyone want the 4 pc kit minus the wing for $1071.00 with u.s. shipping costs???? or close to equal priceing fro individual pieces with u.s. shipping rates on these same items(minus) the wing? i just found somthing pretty incredible!

-justin

 

just to add, the wing can be purchased too for $530 but is purchased separately from the 4 pc kit....

i dont have all the details but can easily find out in a phone call.........curious yet?

-justin

 

ok, here it is. go to this link, look at the 350z right under the 300zx on the top of the page. kit look familiar? also scroll down the page about 75% & look at the 350z wings, look familiar? its erebuni corp. they carry this kit. they wont be back in untill monday so im going to call then. i looked in the FAQ & found that they probably wont reply to an email & that anyone interested must call. they can give separate prices or sell the 4 pc kit as a whole, also selling the wing but it must be purchased separately.......heres the link: ( do i get any bonus points for this? )

http://www.erebunicorp.com/NEW/NISSAN.HTM

-justin

 

heh... if you look at the pics on the Erebuni page and compare them to the pics speed-racing posted, you will notice the reflections of the SB paint are identical, the rims are identical, even the BBK is identical.

 

Hrmm..

Obviously a poor job of doing the Erubini on the license plate, not to mention the same rims. They have rip off's of Sarona and Nismo on there as well.

As far as I know they are pretty notorious for this.

ravi

 

That is some of the worst photo shop ive ever seen. ? is can they actually obtain this kit, if so is it rip off original what is the deal here?

 

gotta give em props for being so quick though....and its not even cheaper

 

someone pm me the height, width, length of the various peices and the weight of each peice and I can try and see what shipping would be though UPS.

However only palletsize loads will begin get discounts.

 

Actually I believe that Sarona buys their parts from Erebuni, at least some of them. If you're talking about the Fenders for the Z, thats the case with them.

Sarona is just a distributor, they distribute kits that other people make, whereas Erebuni makes and distributes their own stuff. When I was modding my M3 I remember buying some stuff through Sarona that was actually made by RPI and Reiger Tuning, and Sarona was just the distributor for them, like a real estate agent or something.

However, yes Erebuni always makes ripoffs of other more expensive kits for half the price. Thats how they make their money. My friend has a Z3 and loves the Veilside kit for it, and realized that Erebuni makes an identical kit. In his logic, why pay twice for the Veilside name? I tried to explain to him fitment issues and whatnot, but whatever...

 

well it is obvious that these are the same pictures from speed-racing, but they are advertising the kit for sale here in the u.s. i just wanted to show you what i had found. even if the kit is special order & takes a while to get it, if we pay the higher prices for the individual pieces were interested in were deffinately going to save on shipping. im sure the erebuni route would be much cheaper than the GB were planning to do directly from italy! im going to call erebuni on monday morning to see what they have to say. i thought you guys would be more excited about these pieces being available with u.s. shipping costs. erebuni is still a big name in the bodykit aftermarket that im sure thier not just falsely advertising this kit. i do believe that erebuni is the original manufacturer of the shogun (sarona) bodykit for the z.......im excited to hear what they have to say about it!

-justin

 

so you think they dont actually sell the pieces?
Or if they do, are they replicas?

 

Maybe we can get a group buy going from erebuni...?

 

now you guys are thinking on my level, lol!!!

mabey cbrflyer919 can contact speed-racing(assuming he has done so in the past) to see if he has any info on this......

-justin