buzzardmountain

iTrader: (17)

If its polished aluminum, can't you take it to someone and have them lightly sandblast it to give it the brushed aluminum look?

geez zee

iTrader: (2)

Of course, the finish could be made to look just about any old way you want. It could be "sand blasted," although sand would probably the worst media... glass beads or other less aggressive media would give a more subtle finish.

If you really want to to look "brushed," then brush it... Scotchbrite or other fibral abrasives would work just fine, and are easy to use.

But, don't forget, after the fuel filler door is "blasted" or "brushed," it will need to be re-anodized (clear, of course) or the surface will oxidize and look pretty cruddy in a very short time.

Teez Zee

Red - What would the price be if we purchase a dozen - I know this question was asked before - Any idea?


Or, are you waiting to get the part in

JDMZ33

iTrader: (121)

I can have this made for alot less. Let's say under $150.

Teez Zee

Lots more details please

GTNPU Z

iTrader: (17)

+1 on more details please.

If you can make it to match the door handles too, that'll be a BIG plus .

JDMZ33

iTrader: (121)

can be done, but cost more than chrome. We have done this type of item for hummer H2 gas door. Check out our site http://www.evo-r.net/product/H2/index.htm So shouldn't be too hard to make similar item.

- Jay

GTNPU Z

iTrader: (17)

No worries. If the price is cheeper than the current alternative, I'm sure there will be several people out there willing to pay. Also, if you can also design it so there is no necessary body work that needs to be done as well as the use of the remote latch. I think you may have something that will sell pretty good.

Thanks!

gringott

iTrader: (17)

Just buy one of the German ones, dupe it in aluminum or brushed stainless.

Teez Zee

I have not interest if it looks anything like the hummer gas cap.

I like the extremely smooth lines of the german unit.
I also like the assymetry of the mounting holes and the attachment flanges for the german unit.

GTNPU Z

iTrader: (17)

This is very true. It has to look similar to the Cobra Gas Cap from Germany. I know you just showed the picture of the H2 cap to show that you can make them but it definitely has to match the car. That H2 cap look good on an H2 but not on the Z.

Teez Zee

Is the gas cap curved in two planes?

What does the inside look like? Can we get a photo of the scratched cobra unit?

Aluminum might scratch easily. If it gets scratched (keyed) is it possible to fix it?

Faluzure

Subscribing.

Phatmitzu

iTrader: (34)

Subscribing.

Blue_pen

well it match the door handles?

geez zee

iTrader: (2)

Hey, Adrnln1...

Should you be getting your new fuel filler door pretty soon? Any word on it's arrival date?

Adrnln1

Sorry Guys... no gas door yet... Paul said it would be 4-8 weeks and this week makes 6. I sent him an email yesterday checking if he had an eta, but have not heard back yet.

I promise to give you guys a write-up as soon as I have them in my hands.

testaccount

Hi guys,
i knew some Zdrivers here in germany have this one from Cobra, the quality is not very good, only every second fits the mounting.... !

Adrnln1

Can you elaborate on the fitment issues. We have been assured by Paul that he has done several and they fit well.

Please provide more detail.

Thanks,

gringott

iTrader: (17)

Boy, I thought with that price it would fit perfectly. Too much money for fitment issues.