New EVO-R Dry Carbon Fiber Dash Kit
08-08-2005, 05:41 PM
#241
Registered User
iTrader: (5)
Join Date: May 2005
Location: Long Beeyotch
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
From the pics it looks awesome, what are you impressions of how it looks? Thanks for the tips on installation btw, if one does not have a dremmel, what else should they use? or should I just buy one, if it's cheap!?
08-08-2005, 07:42 PM
#242
Well, looks is a subjective thing... I think the kit looks OK overall.. IMHO, the best looking and fitting pieces are the door inserts and shifter base.. it looked real classy with them on ...
.. but when i put on the big center piece and the gauges it was a little bit too bling-bling-in-your-face in my opinion.. a little bit too "ricey" looking.. but everyone has their own opinions about what is ricey or not..
One thing that i wish is that the center piece could have a few more rounded edges.. because inperson you can still kinda tell that it's a stick-on-top kit..
a dremel is about $40.. you can prolly use a file or razor to trim the CF too..
--mike
.. but when i put on the big center piece and the gauges it was a little bit too bling-bling-in-your-face in my opinion.. a little bit too "ricey" looking.. but everyone has their own opinions about what is ricey or not..
One thing that i wish is that the center piece could have a few more rounded edges.. because inperson you can still kinda tell that it's a stick-on-top kit..
a dremel is about $40.. you can prolly use a file or razor to trim the CF too..
--mike
08-09-2005, 05:39 AM
#243
Vendor - Former Vendor
iTrader: (121)
Join Date: Oct 2002
Location: NY
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by leemik
Well, looks is a subjective thing... I think the kit looks OK overall.. IMHO, the best looking and fitting pieces are the door inserts and shifter base.. it looked real classy with them on ...
.. but when i put on the big center piece and the gauges it was a little bit too bling-bling-in-your-face in my opinion.. a little bit too "ricey" looking.. but everyone has their own opinions about what is ricey or not..
One thing that i wish is that the center piece could have a few more rounded edges.. because inperson you can still kinda tell that it's a stick-on-top kit..
a dremel is about $40.. you can prolly use a file or razor to trim the CF too..
--mike
.. but when i put on the big center piece and the gauges it was a little bit too bling-bling-in-your-face in my opinion.. a little bit too "ricey" looking.. but everyone has their own opinions about what is ricey or not..
One thing that i wish is that the center piece could have a few more rounded edges.. because inperson you can still kinda tell that it's a stick-on-top kit..
a dremel is about $40.. you can prolly use a file or razor to trim the CF too..
--mike
Becarful when you trim these carbon fiber parts. I was triming all the rest kits today. Stupid me forgot to wear long shirt. After triming 24 kits, my arms iche like hell!!! Yea, this kit surface is very glossy. Mike they look very nice! All these kits are hand made. So there might be little areas you might need to trim. I try to trim all the kit as possible... Just hope you guys don't have to tocuh fiber! ooouch!!!
BTW Mike got the first full kit, cuz he provide me all the OEM parts to make this happen. Thanks again Mike!
Last edited by JDMZ33; 08-09-2005 at 05:49 AM.
08-11-2005, 07:05 AM
#248
Vendor - Former Vendor
iTrader: (121)
Join Date: Oct 2002
Location: NY
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mono11
please give us and update , sorry we been a pain in the ***. i'm sure ur pretty busy, but and up date would be nice.
Jay
08-11-2005, 09:41 AM
#249
Registered User
iTrader: (3)
Join Date: May 2003
Location: NYC
Posts: 756
Likes: 0
Received 0 Likes
on
0 Posts
Ooo... ooo... pick me to send out tomorrow
Seriously though, how did you think you will decide what order to ship out? The order we signed up?
BTW.. I'm glad you are taking your time with them to make sure they are just right. I know we have been pushy and anxious to get our hands on them, but I would rather have it just right in the end. Thank you.
Seriously though, how did you think you will decide what order to ship out? The order we signed up?
BTW.. I'm glad you are taking your time with them to make sure they are just right. I know we have been pushy and anxious to get our hands on them, but I would rather have it just right in the end. Thank you.
08-11-2005, 11:53 AM
#250
Registered User
iTrader: (8)
Join Date: Aug 2004
Location: texas
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
thanks man now i can sleep well at night, when u shipthe first bach can u please post the names of the people u send . cuz that way i'll be on the look out for my package, when i recive package from out of the country i have to sign for it that way i can come staight home that week from work. to make sure i'm home... once again thanks alot for taking ur time and putting up with our posts and reply to them. as soon as i get my stuff i'll give u a +1 on ur feedback.. thank you
08-15-2005, 05:28 AM
#252
Vendor - Former Vendor
iTrader: (121)
Join Date: Oct 2002
Location: NY
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MSOsr
Whose kits have been sent? Are the rest going out on Monday?
*** IMPORTANT ***
I have insured all packages. When receiving package make sure there is not visible damage on the package. If you feel there is some damage, please open the package with postal man. Inspect all items for damages. Thank you.
Jay
Last edited by JDMZ33; 08-15-2005 at 05:36 AM.
08-16-2005, 07:27 AM
#256
Vendor - Former Vendor
iTrader: (121)
Join Date: Oct 2002
Location: NY
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
I have put a small box in the middle of the package. I will protect the package from getting crash. If you received the package and notice there is a small bump in the middle, don't worry. Just want to let you guys know. Thanks!
08-16-2005, 04:39 PM
#258
Vendor - Former Vendor
iTrader: (121)
Join Date: Oct 2002
Location: NY
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lovetoclown
Do you have any more kits?
Check out http://www.evo-r.net/product/CF_INT/page_01.htm
for pricing. Thanks!