Originally Posted by Aeleven

Im interested in ordering a set but i dont want to wait a month to receive them, the price is good.I have an AUTO, PM when you have a sets that are not on back order.

Originally Posted by JDMZ33

For those who have received the kit, please read this! This is how I installed my kit with perfect fitement.

Note: Please try to test fit them before actually stick them on. Cuz once they are on, very hard to remove and might crack the covers.

1. Place the center dash cover first. Align the center dash cover's horizontal line below the Nav door cover with OEM line. Push Down.
2. The line above the NAV door cover should be align with the OEM dash.
3. Pull and push the sides of the center dash cover foward and press down.
4. Push all the center dash surface down, make sure the 3M double side tape is all secure.
5. Place the NAV door cover.
6. Align all 3 circle ***** with the 3 circle holes on the shifter cover.
7. Pull and push the sides of the shifter cover foward and press down. Press down all sides of the shifter cover down.
8. You might need to trim this part a little to make the shifter fit better.
9. Place lower part of the guage pod covers. Try to push them as back as possible.
10. Place top guage covers. Make sure you place them in correct order. Try to put the sides of the cover under the center dash cover. Push them back as possible.
This compelets the center console covers. If there is any question about installation, please PM me or email me. Wrong installation procedure might end up bad fitment. Thanks!