motorsports wing
Thread Starter
Registered User
Joined: Jun 2005
Posts: 49
Likes: 0
From: Los Angeles, CA
motorsports wing
Does anyone have experience with Motorsports or zcarparts?
I really like the fiberglass spoilers that they offer and need some feedback on installation, quality, and durability.
Thanks,
Brian
I really like the fiberglass spoilers that they offer and need some feedback on installation, quality, and durability.
Thanks,
Brian
Well, that's the wing I bought a while back. I still haven't installed it. I had a shipping problem on the original one they sent. The tips weren't padded correctly for shipping and were pretty chewed up by time it arrived. They were quick to send my replacement, which arrived in better packaging but still had a small chip in one tip. It will need a little rework before installing. I should point out that I'm a perfectionist about these things; the chip is very small.
I plan to install it in the next few weeks. I post more impressions as I go.
BTW, they sell a cf version now. Probably would have bought that if it was available at the time.
I plan to install it in the next few weeks. I post more impressions as I go.
BTW, they sell a cf version now. Probably would have bought that if it was available at the time.
Last edited by arizzee; May 1, 2006 at 06:21 AM.
Trending Topics
I have the Motorsposrts Daytona Wing, which is kinda similar and I also am waiting to get it painted and put on but I'm not 100% sure I'm going to use it or get a different wing or no wing at all.
What do you want to know about it/them?
The quality of mine is excellent, though the right side while resting on the hatch, sits a tad ( 1/16" max) higher than the left which would go away when it's bolted on, I'm sure
What do you want to know about it/them?
The quality of mine is excellent, though the right side while resting on the hatch, sits a tad ( 1/16" max) higher than the left which would go away when it's bolted on, I'm sure
Last edited by Chad68; Apr 29, 2006 at 09:22 PM.
motorsports lemans
in my opinion this is the hands down best looking aftermarket wing for the 350z...period!
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<
>
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<
>
Last edited by 1z4u2c; Apr 30, 2006 at 02:15 PM.
Originally Posted by 1z4u2c
in my opinion this is the hands down best looking aftermarket wing for the 350z...period!
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
Well, I went down to the motorsprts show and did not see a single motorsports wing (daytona or lemans) on a Z. It was a Nismo (and replica) wing convention though.
I did end up buying the Daytona though but they are going to have to ship it because they only had one and it was already spoken for. I get the shipping for free though so it's not to big deal and I didn't have to pack it back.
I'll post pics when I get it done but it's probably not going to be done for another month.
Chris
I did end up buying the Daytona though but they are going to have to ship it because they only had one and it was already spoken for. I get the shipping for free though so it's not to big deal and I didn't have to pack it back.
I'll post pics when I get it done but it's probably not going to be done for another month.
Chris
Originally Posted by 1z4u2c
in my opinion this is the hands down best looking aftermarket wing for the 350z...period!
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
CAn you pleeeeeasse take a couple more pics? Maybe one the from the side, one from straight behind, and an angle shot? Thanks!!!
Originally Posted by 1z4u2c
in my opinion this is the hands down best looking aftermarket wing for the 350z...period!
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<>
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<
>Kidding, it's nice.
Originally Posted by 1z4u2c
in my opinion this is the hands down best looking aftermarket wing for the 350z...period!
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<>
It follows the line of the z perfectly.this is the wing that nissan designers should have designed for this car..
My lemans wing fit perfectly, except the instructions are generic and the bolt holes in the wing will end up being right over and very close to the plastic liner on the hatch. you have to be aware of the plastics location so you won't drill outside it.
If i had it all to do over again i would have only taped it.
<
>Isn't the Lemans a little big to tape on?
I believe it is a little heavier than my Daytona. I thought about 3M taping mine but I think it's too heavy for tape only. My biggest concern is that the tape won't adhere to the spoiler good enough. I'm pretty sure it will stick ok to a wax free paint but the spoiler doesn't have a smooth enough surafce to get good adhesion.
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM
Subarism
East Canada
0
Sep 23, 2015 06:22 PM
